Everything MOLLE BS

Sorry sir, it’s now closed.

 

Looks great! Am curious what powder coating colour choice you used?

--Murray

 

Designed and printed some custom hooks for my camp chair. Fit nicely over the molle slots from @docloco's rear seat molle panel.

 

If anyone wants the STL file, DM me. It should work for any generic camp chair or other gear of the same size/dimension. Slight modification to make the weakest spot a bit stronger:

 

Sadly I just discovered this. Sounds like the last group buy came and went. Sub’d in the event that changes. If anyone sees something similar for gen3 double cab w/ power window please share!

 

At the request of a forum member, I am going to attempt to make an AR mount based off the chair mount I posted. Stand by!

 

Version 1 of the Rifle Mount is ready. I have not printed it to test a setup with it, but it should be a good starting point. DM me and I'll send you the STL file. Feedback for improvements is welcome.

 

You should sell them.

 

As long as the people I send the STL file to don't try to sell them, I am happy to give an hour of my time pro bono (CAD time) to support this great TW community.

 

I cleaned up the Chair Mount a bit more.

 

GB #24 checking in - just received my panel today! Double cab, power window, sub, full panel across the back in powdercoated black. Didn't even hear about a tracking number but it showed up! looks very nice!

THANKS!

 

Surprise to me too. Glad you’re happy with it. I’ll try to get shipping info on the others.

 

Can we get more pictures of how you have the whole back wall set up? looks like we have the same panel. curious how you cut the surround for the woofer and the other side and what that looks like.

 

A mere 26 pages ago, you will see what I did with the woofer panel cover...
https://www.tacomaworld.com/threads/everything-molle-bs.410254/page-200#post-23797054

I also recently did a 3/4 rear seat delete with cooler slide out:








This lets me:

1) Allow for a rear passenger in an emergency with the remaining seat back
2) Keep all the dog stuff and a few accessories safely hidden behind the remaining seat back, which still folds forward to get to the rear molle behind it
3) Dog platform is much flatter than using the bottom seat of the 40% side, so that was part of the 3/4 delete
4) Get to all the stuff underneath the stock seats
5) Have a cooler slide out for bonus overlanding points

You can see I was using two large Quick Fists for the camp chair mount before. Man, those were a pain in the ass to use for putting the camp chair back in while the cooler was in the way. Hence the need for these easy in-and-out chair hooks.

 

Gb24 panel received today. Northern Virginia. Long day at work, and had to get right out for camping so didn't even open the box... But it's here!

 

Here are a couple daylight photos of my everyday load out, focusing more on the molle panel bit. Now the chair is nice and easy to get in and out even when the cooler is in the way.

 

Thats exciting. I'm from nova to - maybe mine's close

 

I decided to check the porch and it was close...very close.

 

Fantastic to hear gb 24 are starting to ship! Shipping info would be great!