What Have You Done To Your 3rd Gen Today?

I always do! These pads are something like 23% larger than stock, plus the directional fins in the rotors actually cool the rotors as they spin. The company makes Dakar winning liquid cooled calipers, so I'd like to think I'm paying for the racing tech.

Check out this pic of their racing calipers:

 

That makes sense. Didn’t realize they’re that close to the frame. Thanks man!

 

Yeah I know. I think some of the vowels were left out

I knew someone would catch that

 

What rack is this?

 

It's just a basic fork mount attached to the bed rail using T nuts. Only modification I had to do was open up the holes in the mount for the bolts.

 

Myself got the Timbren

 

Do they serve a dual purpose for heavy cargo and off-roading? I don’t have my overload leafs in with 3 leaf progressive AAL. I off-road more than haul anything and was just trying to find a suitable option to my current setup in case I ever do need to haul anything heavy.

 

Where can i get that mount?

 

Our Taco off road is stock, just Timbren for heavy loads and towing front and rear. They offer the off road too if you're into that that are a bit softer and come with inverted u bolts, check them out !, but watch out Amazon sells knockoff made in china. They should say Made in Canada!
@Timbren-Industries

 

Thanks man! Appreciate the help!

 

Looks great! We have the same Dobinsons MRA's. What coil did you go with up front?

 

I went with the c59-314 medium load. I don't have a front bumper yet but likely will do something minimal with a winch some day.

 

You're welcome brother. I was going to shop Amazon since I get stuff from there all the time but when I checked the part Timbren TOFTUN4 and said made in china...I contacted the company and they confirmed that vendor on Amazon sells knockoff. Can't say about all Timbren on Amazon but somehow that part (front...hence TOF...f for front and

$239 TORTUN4 Suspension Enhancement System

TORTUN4 ...rear...R) was not the real thing. Watch out, real Timbren are all Made in Canada!, or contact @Timbren-Industries for an approved retailer.

 

Tailgate decal...I'm loving it.

 

Just ordered an RSI SmartCap EVO Sport, $3,685 out the door.

Backordered until September

 

we looked the same too...and sadly, it is all gone now. As mentioned in another thread, this will probably be it until next Feb for us, so now I go into hiberanation. Wake me when the avg high temps are in the 40's, the humidity is in the 20's, and there is only 9 hours of light

 

Nice been thinking do this.

 

Ugh, always one last punch...

 

$14 Sunlite Fork Mount Bike Block

https://www.amazon.com/dp/B000AO7GRG/ref=cm_sw_r_cp_apa_glt_fabc_AQ2APJS233A8Y4Z8DWH1?_encoding=UTF8

 

CBI Covert Bumper. Warn winch. Diode light bar