What Have You Done To Your 2nd Gen Tacoma Today?

hell no he would make an awful wingman.

 

I just did something similar and my ride improved noticeably. Good luck!

 

Have you taken a look at your transfer case actuator? That's what the issue with mine was.

 

Spiker Engineering mount

 

Changed transfer case fluid. Next week is front diff. One maintenance item per paycheck. Ecgs bushing and axle seal in the mail.

 

Chrome delete! Did a grille swap with a base model Tacoma and had it painted 1G3 to match since painting over plastic chrome never lasts.

 

Do you have a write up on how to do this with a parts list? I am I am interested in the rear charger.

Thanks

 

Nothing like cruising down the beach. Installing the trail toys edge trim today to get rid of my makeshift trim I got off Amazon that I ended up having to glue on.

 

https://shop-hondogarage.com/products/tacoma-basic-radio-knobs

 

Thanks!
I will probably end up buying these, but painting was a free option for now....

 

Took some pictures of it

 

Guessing this was a pretty straight forward and easy install? i've got a set on the way

 

I mounted mine on the windshield.

 

My baby is growing.

*picture taking on a closed course

 

I got the vertical mount from UltraGauge. The length of cable is perfect, it reaches the OBD port without any excess cable.
Don't try to slide the plastic piece all the way in, you will break it as their instructions say. Wish I heeded that warning.

I'd post the link to the part but when I go to ultra-gauge.com I keep getting redirected.

 

Or like all the YouTube videos of people racing on the 10 freeway titled, "racing in Mexico"

 

Easiest one for these mileage photos is just to say my passenger leaned over and took the photo... lol just saying.

 

I dropped the spare tire and removed the chain hoist. My 35 is not gonna fit under there and I don’t want the chain banging around.

 

Tailpipe Chop!

 

Talked to a potential buyer so I can finally upgrade.