Cali Raised LED Rock Sliders for 2005–2023 Tacoma – Trail or Step Edition, Bolt-On Fit

Probably a silly question, but does anyone know if the DCLB versions will fit in the bed with a tonneau cover and the gate up? Planned on picking these up in Ft Worth (whenever they are ready) then the wife and I will be doing some traveling around the area. I didn't want to leave them open for potential theft when we stay in the cities.

 

Want to place an order for the step sliders soon but keep going back and forth between with the full plates or not.

What is the overall purpose of them? To have better traction for stepping on them? Also do these actually help as a step? Or is the location still too high to actually get some good use out of them?


Also any pictures of them on a DCSB Tacoma would help


Thanks.

 

I have a set with no kick out and no filler plate. Actually just got a new set delivered yesterday to replace with a set that has the filler plate and kick out. Worried my son is gonna slip through and hurt his foot or ankle when he’s getting into the truck.

 

hey hey, thanks for this thread
looking to get the 0 degrees with fillers

Do you happen to know the weight of these?

Also, any distribution sites near Portland Or? I checked the site but can't seem to find the list

Thanks again

 

@CaliRaisedLed

Could you tell the distance from the frame mounting plate to outside edge of the 0 degree slider? I am trying to visualize exactly how far out these stick. All the pictures look like they stick out further than other brand 0 degree sliders. Also if you have it, when the door is open, the distance from the bottom of the door to the top of the slider so I can visualize the height.

 

Does his help out?

 

That helps some but I lose the reference point of where 0 is on the truck. If I could just measure from the frame to the outside edge of the slider than I know exactly.

 

From the frame to outside

 

Thank you!

 

thank you!
This helped me and purchased them right away, can’t wait until they are delivered.

Got the kick out and plate since I want them to also help my little one get into the truck as well

 

No problem, happy to help. You’ll love em when you get them on the truck!

 

subscribed.

 

Looking to purchase a pair of 0 degree w/filler plates and no kickout for a DCSB. Do any of your sites have any of these in stock? Not too concerned if they are raw or powder coated. Thank you (I'm located in Las Vegas).

 

I apologize if this has already been answered, I'm just wondering if there's a distro site for y'all in/near Portland Oregon? When I can pull the trigger, I'm definitely going with y'alls bolt on sliders. Just trying to find a way to pull the trigger sooner than later
Thanks

 

Cali Raised, what are your current lead times?

 

LEAD TIME: RAW 2-4 WEEKS | COATED 4-6 WEEKS!
https://caliraisedled.com/pages/rock-sliders

 

This is quite literally the best question I have seen on the Cali Raised Step Sliders. Thanks for asking it and thanks to Cali raised for responding below.

I have been torn on these as some angles really make it look like these stick out really far. But I just measured based on the cali raised measurements below and it is not as much as you would think.

 

Definitely not 4-6 weeks.
I’m not sure why you would even be promoting that lead time.

I ordered my sliders on April 24.
And opted to have them powder coated.

Contacted them today and received the following response.

“Thank you for your patience. Due to a shortage of welders and the volume of orders that we have, It will be about 3-4 weeks. We appreciate your patience and will processing orders as quickly as we can. I apologize for the wait.”

So expect a three month wait at the MINIMUM since they also said once ship they may take up to 14 days to arrive.


Really wished I knew all of this in advance

 

Looking to get a set of the 25 degrees, but wondering if you do custom angles, like 20?
Thanks