What Have You Done To Your 3rd Gen Today?

Now the question is, how to seal them up so :muddy waters" don't flow down the bed liner and soil all might white silk suits.

 

Where did you locate the Schrader fill valves for the air bags?

 

I have an access cab and it has the harness but no cargo light.

 

This is the LED lighting I installed.

 

I have the Tyger brand same as yours and I paid $179 but that was 3 years ago.

 

@Tacomus Prime - Here is a pdf link from Retrax. https://retrax.com/images/RXXRSeriesAccessoryCompatibilityChartFinal.pdf Hope this helps.

 

I like my Damed AIR!

 

That’s the cover I bought. My son bought one for his truck a year or so ago (Teenager working at Wendy’s) and it has held up very well so I said for the money I will give it a shot. I’m pretty happy with mine. The fit isn’t perfect it doesn’t seem to want to lay as flat as some more expensive brands but good enough.

 

I installed a viair OBA part number 10003 and a pneumatic switch from firestone part number 9074. I'm working on a parts list and guide to how I did it. It's a clean set up.

 

That calls for another Dos Equis for like for 'cooling down' off that high. Not good to go cold turkey.

 

If you find something good please share back, I am looking at doing the same setup and it looks like Yakima is my only real option if I want adjustable height to full(someday looking to add rook rack on my naked DCLB roof) so I can haul anything from a 10' board to my kayaks etc...

 

We have a harness? Does the other end run to where I can put in a switch? I hate not having a cargo light.

 

Made Ginger earn her top tier fuel today, first day of mowing season and the brakes went out on the old F-250.

 

First mods! Installed a new rearview with homelink and smoked, sequential turn signals. More to come...

 

Well let's see..... Finally got around to some color matching last Sunday and I have to say, I love the look. Bought a VooDoo Blue can of paint spray and redid the color of my crowbar and shovel. Oh shoot, I forgot the shifter knob too.....

 

I see that you resisted painting your fire extinguisher too.

 

Thanks @Phich — for the vFTune KDMax tune!

We each drove 2 hours to meet. Thanks for getting me ready for Moab. 35s and relocate when I’m back so we can meet back up for a touch up. I’ll see how 4lo does and we can get more feedback after next trip too.

Here’s a shot of the our super white tacos:

 

I didn't trace it although I don't recall seeing any extra wires behind the 3rd brake light when I replaced it with a 2nd Gen LED unit.
I did buy a PnP plug for the harness at the switch location so I could get an illumination tap from it to illuminate other switches.

 

I dig seeing people so close on Tacoma World. I’m in New Port Richey. Howdy neighbor

 

Added the BPF driver’s side recovery hitch to balance the BPF hitch I already had on the passenger side. I decided to leave the D shackles off and stored in my recovery bag behind my rear seat. I guess I like the more subdued look. I have used the passenger side hitch in a recovery. With the second one, I’ll use an equalizer strap to lessen the load since they are both attached to the subframe.