What Have You Done To Your 2nd Gen Tacoma Today?

Got a re-re-alignment and finished up the Harbor Freight 1.5T/Pro Eagle jack setup.

 

Finally plugged the holes left from pulling the flares. Grabbed a box of replacement clips and sanded the heads down.



Primed, painted and thrown on the truck. Good thread on here for the whole process, they blend in pretty well.

 

Will definitely give that a try

 

I think this is an isolated incident. So far I haven’t found any other stories like this. Rather there is a massive amount of happy customers - so I think I’m going to stay on track and have them installed.

 

@nudavinci64 just had the same issue: https://www.tacomaworld.com/threads...dventures-and-bs.469415/page-17#post-25579296

 

Anyone ever had a whooshing noise on shutoff with the 4.0L? It's clearly air or another gas but I can't tell where it's coming from.

I changed the spark plugs and engine air filter this weekend so the intake and PCV hose were disconnected and then reconnected, but I was hearing the noise before that too.

 

Does your truck have the SAI? If so, that’s what it is.

 

Yep the vendor of the part reached out (who did not install by the way) and welds seem fine. Going up to Alpine Friday to have it repaired and new ones installed. We will be adding a frame plate which honestly should be added anyway. But yah I saw a post by wheel every weekend who noted it which made me check and bam.

 

Likely I hear that all the time. Always have.

 

Yeah it does. I've only had it for a month so I'm still figuring out what's normal and what isn't. As long as that's a normal noise with that part I won't worry about it. Thank you!

 

Haha that’s my truck as well.

 

Yah we’ll see I am taking my truck to them so they can review and do some r&d, repair add a frame plate and such. but yah not a fun year so far for the truck

 

How are you liking the switch so far? I'm on the fence between trimming the fenders or pulling the flares all together.

Looks solid though. Nice job

 

https://youtu.be/9ANF8q23eY4



4x0

 

Got CBI rocksliders with kickount and top plates, and can now better access what's on the topper rack (and future cabin rack)

 

This is the same exact photo that whatstcp posted. So far it is the only incident that I can find. I appreciate the link to the post that goes along with the pic though.

 

Can you elaborate on how the eagle pro extension fits in the harbor freight jack?

 

That's a great idea.

 

https://www.tacomaworld.com/threads/pro-eagle-extension-on-hf-1-5t-jack.677628/

 

Thanks! I like the flareless look personally, little more streamline. My old flares were starting to fade and warp so it was an easy decision for me