Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

Cool thanks! I guess I could have looked at my invoice too. Appreciate you not being lazy If that's the case though, I guess I'll need to either add some rear bump tabs to the order, or make some. No big deal either way. I probably won't be bothering with the frame notch. Seems like more work than it's worth for what I do. Save that for if I ever ditch the bed.

 

I'm just going to modify my timbrens to work with the SUA setup. May just weld them to the frame.

 

I have no doubt that it’ll be a well designed and complete kit. Just not the route I’m interested in going.

 

@81Trekker any chance you could tell me how far back on the frame the fuel cell sits? I want to mount a hitch to the square tube but don’t wanna hit the cell.

 

perfect thanks!

 

Making progress. Little by little...

 

Just wanted to update you guys... I’m about to get on a plane to Turks and Caicos and will be gone until next Saturday. Obviously I will not be in the shop but feel free to message me. The rest of the guys will be at the shop so if you need immediate attention please call them.

 

Do not answer anyone's texts!! Enjoy the time off...you deserve it.

 

I agree. Turn the phone, laptop or tablet off. No watch, clock or alarm.

 

Will there be 2nd gen option?

 

It's the same upfront for the most part. This kit is meant as a base and you do a lot of heavy modifications and fitting. Plus you gotta build a bumper

 

Enjoy my friend. We have lots to discuss when you get back though

 

I'm curious to know what your questions are and if they have already been addressed in this thread.

 

If it hasn’t been discussed then I’m sure one of us probably knows the answer.

 

I know this has probably been discussed but will the new LCA tabs work on 4th gen 4runners? Really wanting to put 35s on mine and this is the most viable option for doing so

 

I've read the entire thread and have 1 question which I haven't seen answered directly but know you all know the answer. Will the sub-frame kit work with TC 3.5" arms and can I run them in the stock location (not moving them forward)? I found out this weekend my passenger side cam is bent.

 

Yes, you can run the kit with other manufactures arms. I believe stock is all of the way back but someone may have to confirm.

 

I thought the kit was moved forward 1/4 inch from stock. I could be mistaken, I thought I read that a long time ago in this thread. I’ll dig through it when I get home from work.

 

Thats the way I understood it as well, then you could add up to 3/4" spacers behind the control arm from there.