What Have You Done To Your 3rd Gen Today?

Added the Rok Block to the tailgate gap. Smooth install but I got it just a little bit wonky at the end when I was using a roller. I slipped and actually rolled it into the gap, pulled it up immediately but still tore a little off of the underside. Man that stuff sticks!

 

Nothing significant. Just some blind spot mirrors for parking lines and whatnot and a place to hide some cables

 

I tinted my grill emblem matte black. Link below for the tint I used...

VViViD Air-Tint Matte Black Headlight/Tail Light Window Tint (12" x 24" 2-roll Pack)

https://www.amazon.com/dp/B017MWRSWG/ref=cm_sw_r_cp_apa_glt_fabc_P1VM0KFFAG9TWCDGC5Z5?_encoding=UTF8

I was going to remove the emblem in order to wrap it, but ended up breaking one of the clips that hold it in place so I ended up leaving it on the grill. Cleaned the emblem with soapy water and rubbing alcohol, got it all covered (dry method) then carefully trimmed around the edges with an Xacto knife. I really like the look. Time will tell if I have any problems with the sensor but hopefully not.


Before


After

 

That's a cool idea for the blind spot mirrors...

 

It happens. Learn and move forward.

 

Got around to putting a coat of Turtle Wax Hybrid Ceramic Coating spray on my truck this morning. I am really liking this stuff.

 

DAMN!

I was thinking about just doing a plasti derp white wheels for Ss and Gs a bit. I do black right now, every 6 months I take the wheels off for one reason or another (rotation, whatever is happening, etc) and will hit them with a new coat and it looks good and clean all the time now. Powder coating is a bit more durable but at least in black, mine look good all the time - fixes trail rash and curb rash all the time.

 

Where did you get the mirror from?

 

Gave the old girl a nose job thanks to @ACEkraut ’s low profile license plate mount! It was nice to find two holes in my bumper cover under the old mount. The two on the driver’s side didn’t even hit the indent... Oh well, I’m thinking about getting a black bumper cover anyway. This silver one refuses to stay clipped in...

 

Got these last night, weekend install

 

https://www.amazon.ca/gp/product/B08HGPZBMX/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

 

Played a little Tetris in the back.

I'm all loaded up for the Lone Star Toyota Jamboree.

 

Prob can find a fresh one on here. people swap their bumpers out a lot

 

Thanks

 

Thanks mesocustoms

 

Because I spend too much time on this forum, I ordered a set of the EGR ventshades. Took about 15 minutes to install all four. I like the look against both the Cement color and the 35% tint of the rear door windows.

Very easy to install.

 

i had no idea! I’ll have to plan on next year!

 

I used to make similar ones that didn't require grill removal and were hidden behind the plate. Sold hundreds of those things. Anything is better than the stock bracket that cut into the front painted bumper.
Damage from factory bracket

My no drill version (not car wash safe-could bend plate) was $18 shipped

Pinnacle V2 height adjustable no drill (100% car wash safe) was $28 shipped

 

Installed anytime USB charging port with switch. First switch was defective and had to wait on replacement. Glad I hooked it all up on the workbench before I installed it. Thanks CH4X4 for the great customer service!

 

Just got my new bpf recovery points put on. Something tells me this will be the easiest install I will have on the taco.