Ontario BS Thread

I suppose I would.

 

That's good enough for me. Thanks

 

This is who did mine https://www.google.com/maps/place/A...hUKEwieubjj7rLwAhUPVa0KHSa5Be4Q_BIwEnoECCAQBQ

I got them to do a custom alignment to push the wheels as far forward as possible. My buddy has been using them for years with his modded subaru's and porsche's.

With TC UCA's I'm about 4.5deg caster.

 

For anyone who has done headlight restoration/repair - is it possible to get scratches out of just one part without having to do the whole area? I've done the restoration kit on a whole assembly before and it worked fine. But I'm wondering if I'd be able to tape off a square and get the same results

 

I'm thinking the same...if you tape off the area in question I'm sure you can.

 

Taping may leave a line. If the rest isn't bad work the bad spots then as you get finer polishes just work outward so it all blends

 

you sure you're not rubbing against the pinch weld?

 

I haven't been off road with the new tires yet but I drove each wheel up a small hill to get some compression, and only the driver side touches anything. I had to do some plastic trimming, but that's it. I know that's not the same, but it's all I've got for now. Either way, it will be better to have the castor pushed forward as much as I can, won't it? If it turns out I have to do something with the cab mount, so be it, but if I can avoid it I will.

 

I'm still using the stock UCA's, so I'm limited, but should still be able to get a little more castor than my current settings. What shop did you go with?

 

Another Tacoma world member that I met in Barrie recommended this place, just tell them that you have a lifted Tacoma on 33’s (or 35’s) he knows what to do ,,
https://swc-auto.com/

 

I'll look into it, and maybe give it a try. What's the worst that can happen??? I really don't want to ruin my bran new tires, so I want as precise an alignment as I can get.

 

He’s in Burlington,

 

I flattened the pinch weld before putting the tires on.

 

Can i ask who? would be nice to know since i'm in that area

 

Wait, how does elections work?? We're nearing 2000.

 

nearling 40,000 as well...

 

https://swc-auto.com/

 

oh, you were correcting the Barrie comment. I'll keep a tab on these guys!
@Tech HoFFinaTor isn't far from there either.

 

No,,,, I met yota16 in Barrie, he’s from Burlington and https://swc-auto.com/ is as well