What Have You Done To Your 2nd Gen Tacoma Today?

Cleaned MAF and throttle body. The TB looked like the last time it was cleaned was about two thousand and never, which is in fact almost certainly the case. Found some acorns in the filter housing, more motivation to get around to the cowl snorkel mod.

Gave the exterior/suspension/undercarriage a two beer soapy powerwash and general inspection, and took some photos of completed headlight harness install to add to my wiring overhaul thread.

That's a pretty clean install on the switches, nice job. You make that insert yourself?

 

I know I threw a like on there, but for the information, not for the wear :|

 

Oh OK

 

My throttle body was the same way. SO MUCH OIL!! I am thinking I'm going to put a catch can in my system to keep it out of the intake. I want to take the whole intake manifold off now and give that a good cleaning also.

 

Out with the old
In with the new!

255/80/r17 Wildpeaks on Icon Rebound wheels. Loving the new look!

 

Where did you find this grille?

 

Installed Lux Lighting System max white led rock lights.

 

I replaced the vinyl wrap on my roof from a matte black to a dark metallic blue, to match my stock paint more.

No one noticed I had matte black up there and more so now, no one will notice the blue. It's a little lighter then the BRM color. It's lighter than black and gloss so less heat. I wrap my roof and hood to protect the paint from the salt from my kayaks when I carry them.

Also, this past weekend I replaced an O2 sensor on my 2003 Tacoma (threw a code) and finally found where my front end squeaks on my 2014 Tacoma was coming from. It was the bushing from my TC UCA's. So greased them up and no squeak. Man, so happy I found that, haha.

 

got my cmc's all wrapped up today! did a touch more with the grinder and painted it all back up after this was taken. really happy with how it all turned out.

 

Laid out my front fender cuts. Hammered the pinch weld flat & sprayed primer on them. I’ll undercoat them after I cut the fenders.

 

Shout out to ARB for standing by their products and sending me a whole new rear shock!!!

Other than stripping the old bolt, easy breezy.

No more clunk!

 

ARB is a great company always standing by their products. I know someone else who had a rear shock start leaking (he bought them second hand) and ARB shipped him a new one free without many questions.

 

Nice bumper, who made it?

 

Saving pictures for reference when I get around to doing the same. Nice job on retaining the tabs.

 

installed my new plate holder and antenna and base Love the new antenna!!

 

you cant find it. You will need to buy it from @HomerTaco

 

looks like you used the copper anti-seize (which is meant for high heat. Maybe try the silver stuff?)

 

Nice! I have 112k on my 2010. Had 35k when i bought it in 2015

 

Made by Chassis Unlimited

https://chassisunlimited.com/2005-2011-toyota-tacoma-octane-front-winch-bumper.html

 

He ordered it.

bingo.