The Official Unofficial Super Pacific X1 Camper Thread

That’s basically how it is in my 2nd gen

 

Solar panels are up

 

Nice! I just got new ones in. looks good.

 

Thx brotha

 

Got one on. Amazon didn’t delivery the other for some reason.

 

Nice. Sucks about the other one through

 

Yah as long as it shows up before Friday I’ll be good. SP is getting its first road trip post pickup.

 

Same here. We are leaving Friday as well. We are going to Moab, Mojave and then Death Valley. Although I may break off the group after Mojave to go hang with my parents for a little bit since they live in Central Cali.

 

Should be a lot of in field testing coming up

 

As promised, here is the build video from our interior.
https://youtu.be/C-srsB0F6l8

 

Just updated my entry on our Google Sheet tracking list. If you want to update yours, click the link below and select the link in the first column on the left that is associated with your name.

https://docs.google.com/spreadsheet...Bk-qDL03L5S0tFvnJ43Sno8Fk/edit#gid=2085911918

 

Patiently waiting for the SP delay with my ground SP lol

 

This is the tailgate seal I have had for a couple of years. I picked up another one and ran it across the top this past week. ill snap some photos later.

$29 ESI Ultimate Tailgate Seal with Taper Seal 10ft for use with Truck Caps and Tonneau Covers

https://www.amazon.com/gp/product/B00IPQWXZQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8

 

cool ordered the same stuff!

 

what are the chances you have a cut list youd like to share?!

 

Having a frustrating time with leaks at the front of the camper right now. I've re-done the butyl tape in the corners and it isn't leaking right there anymore, but rather a few inches inboard along the front of the bed. It seems to be coming from underneath the header rail, just below the tips of the arrows in the pic. I thought of removing rail that before install and running silicone bead underneath it, but never got around to it.

I'm tempted to run silicone bead along the bottom side of the gap where the water is coming out of but that isn't really fixing the issue and water may just run elsewhere. Unfortunately there isn't enough room between back of the cab and front of the bed/camper to get in there with silicone unless I can figure out an extension to the caulking gun. The flextension tips Home depot sell get poor reviews and are only 8" long. All I can think of is to tape a slurpee straw onto the caulking gun and hope that provides enough length.

Any ideas?

 

If I did, I’d share it. But we just measure, cut, measure, cut… it’s a lot of walking back-and-forth but we make it work LOL

 

Thought this was an image of Mars surface in the future.
Cool tent.

 

That was one of the areas to seal from that previously posted thread.

 

Yup. But I never saw that thread til after my install. Too late to easily remove that rail and seal under it now. Hence, asking for ideas.

Has anyone lifted the camper off their truck?

I just sprayed more water over by the center of the rear window. Water now running down the back from that area. So it's an issue all the way across, not just in a few spots. Corners are perfect though!

Maybe I just need to drill out the drain holes I plugged, and live with it lol...