OFFICIAL - 3rd GEN 275/70r17 Tire Thread

So far this is the extent of the 275’s rubbing on my 2021 SR with 2020 4Runner wheels on it. Has to be pretty much full lock on the steering and this was just yesterday. Coming down off the mountain, horseshoe turn on a pretty steep downgrade. Truck loaded down with coolers, tables chairs, grill etc in the bed and four passengers and other items stuffed in the center of the back seat.

No lift but also nothing extreme as far as off roading goes so it’ll eat that plastic a little more for sure.

 

what version of the 4Runner wheels do you have?

 

Couple more pics

 

Pic #2

 

Thanks my friend, LOVE the grill and tire size. Good job. Ill have something similar shortly and will be posting pics when I'm done. Give me 3 weeks and it will all be delivered and installed )

 

I did the 2/1 lift from the dealer in my new Tacoma. Went with the Falcon Wildpeaks AT3W 275/70/17. I like em. I debated forever on these or the KO2 same size. So many good tire options but definitely less in this size. Everyone around these parts runs KO2'S. Thought I'd be different.

 

Looks great. I've run both Falkens and the KO2s and they're both excellent. Can't go wrong.

 

Thanks Bishop4WD. Definitely can't go wrong with either. Love em both!!

 

Phenomenal looking rig! I also have the TRD Leveling Lift and like you am really torn on the Wildpeak 265 or LT275s. Any rubbing? How is clearance around the UCA? What has me leaning towards the 265 is the large jump in weight of the 275s. I know it may be a little on the small side with the leveling lift, but damn...those 275s are heavy! Oh, and I have the FSW 2021 4R rims. 8.5' wide, 0 offset.

Think you can post a couple pulled back shots of your rig? Would love to see the stance with 275s and the TRD Leveling Lift. Now you have me re-thinking the 275s.

 

I couldn't get it to fit correctly without relocating the tire lift. Simple fix and my full size spare fits now.

 

Are these wheels the OEM 17x7 or the aftermarket 17x8 versions with 0mm offset? Looks phenomenal by the way.

 

So I get a little rub now when I'm at full lock and really compress the front. Tends to happen when I turn into a gas station, etc. at speed and it's just barely rubbing the inside corner of the plastic fender.

 

Yeah, id love to see multiple angles to gauge exactly how the offset it with the tire poke. I bought a set of 17x8.5 0mm offset wheels and am now afraid my truck will look like its on Roller Skate wheels with too much poke.

 

Thanks buddy. These are the OEM 17x7.

 

do you have any direct front front and rear angles? I’d like to get an idea of how much poke they have.

 

Thanks. Loving the new Taco. No rub at all. Not even close.

 

Couple more. Not overkill in my opinion. I did tonnes of research beforehand to make sure.

 

Well sh*t...you got me re-thinking the 265s. No lift other than the TRD Leveling lift? How is the weight of the 275s with regards to acceleration and responsiveness?

 

I've got the 275/70R17 wildpeaks on the TRD SEMA rim. Icon 2" lift all around. Now that the lift has settled I'm getting some rub on the back of the wheel wells on the fender flares and some on the wheel well liner when I'm pulling into driveways with some speed and it compresses at pretty close to full lock. I'm going to trim and heatgun the spots and hopefully that will take care of it.

The truck definitely suffers from the heavier tires but I did the KDMax tune and that has made a huge difference and it's better than stock now. MPG definitely took a hit though.