all-pro UCA's, Walker shocks, OME leafs

Just picked up this setup for a great price in Utah.

Here's a photo........

Anything I should worry about before starting the install??

I don't have the 8 washers for the UCA's.
What size washers do I need, or do I just use the stock washers? (if there is any)

I've read up on how to shim/reposition the carrier if needed for vibration.

Thank you for taking the time to read this post.

 

longer U bolts for the leafs.
grade 8 bolts for the coilovers, should need 6 total.
maybe think about gettng extended rear brake lines

 

EDITED ^^

 

haha not for me. I dont wanna have to think about anything to involving when im drunk.

 

Thanks Zombie,

I currently have rear blocks so I will check the length of the U bolts and see if they will work.

Do you know a size for the coilover bolts?

Thank you.

 

oh i wasnt saying to get drunk but i know when i installed my lift i couldve used a beer to calm me down lol once my truck was in pieces kinda freaked me out

 

Im not sure what Mine took, had to go buy from lowes. I just called allpro and they helped me out. I think it was like 1 3/4" by 1/4". your best bet is to just call up whoever sells the walkers and find out for sure.
since you already had blocks you should be fine.

I would be hammerd drunk If i drank 12 beers! im a lightweight.
give me some sweet tea and im good to go!

 

ya your right twelve is excessive........tall can ???? < a little better right?

 

haha yea, Ill have a tall boy

 

you'll need new washers.....pretty sure stock uca's only have two per side...you'll need 8. Just take a bushing out of the uca and take it with you to lowes or wherever and match up hole size with bushing diameter.