Fixed problems with add a fuse into EFI2

I tapped into the EFI2 fuse for my new grille lights. The check engine and TRAC OFF lights came on after. All the codes it threw were for the MAF. I fiddled with the fuse a little. Seems like the fuse wasnt in tight enough. After securing it down tigher, the lights went off. Hope this helps someone.

 

I would tap into a less critical fuse to power up some grill lights.

 

Why the EFI circuit? I would pick something a little less critical also...

 

Thats like tapping into your furnace for power to the toaster.

 

You may want to rethink that circuit as it will power up on its own when the truck is off... Read this tread:

https://www.tacomaworld.com/threads...g-with-ignition-key-off.677605/#post-23846885