Ontario BS Thread

Oh no. I've been procrastinating.

 

did you use the factory diff breather? Or did you buy a 2 way Diff breather? Ive seen most people recommend using a 2 way instead since the factory one can still cause the vacuum effect through axle seals.

 

I used the factory one as I had no idea about the two way.
Where does one find a 2 way?
It will be easy for me to change just pop out the tail light and R&R.

 

Then you can show me how to do mine so the next time you go swimming in the mud I can follow you in.

 

Lol I showed you one 3 weeks ago: https://www.tacomaworld.com/threads/ontario-bs-thread.249665/page-2004#post-25645577

I've also seen people using commercial/shop air compressor filters. Something like this:

2pcs 1/2" PT 20mm Air Compressor Silencer Filter Metal Air Compressor Intake Filter Noise Muffler Silencer

https://www.amazon.ca/Compressor-Silencer-Filter-Intake-Muffler/dp/B07WDVYQ66

 

things on the go for me.



still have to move the starting battery in here…..

 

All things considered, the van is better than I thought it would be ( for the price). I was worried about the brakes wearing out prematurely, but it rusted before that happened . That's why I bought a Toyota and stayed away from domestic.

 

Toyotas are bad for corrosion of the pins in the brake calipers, few dabs of high temp brake grease will keep them happy.

Come to think of it I could have just left it at, the first 5 words.

 

you got me with the first image, don't have a clue as to what that is going to be

 

Where did you order the hangars from?

 

First image is the making of body mounts. Still have to trim the bottom of the tube off and shape it to fit with my sliders and get the clearance like the other kits on the market.
These make it a bit clearer.


Not perfect but they should work.

 

Believe he has the bamf ones.

 

i am up in the orillia area and looking to do some day trail runs this weekend til tuesday. anyone going?

 

Oh ya!!.....

 

For the money...they really are the only game in town. They are everywhere.
My buddy has them in his shop constantly for brakes.
Side note; at least it wasn't a 1900 dollar fix like the wife's Benz!!!

 

Never wouldn't guessed that. It looks good. Nice.

 

Do you have a.trail in mind?

 

i do but also open to other suggestions or existing plans. anyone done the gibson river trail? could also run some of the trails out the concession way.

 

I dont have anything mind but tomarrow I'm open to getting out and doing something for the day.

 

$8 Toyota 90930-03136 Toyota Breather Plug - 90930-03136

Toyota 90930-03136 or Dorman 924 -284
Is what most people use and it fits 3/8 fuel line.
Apparently the front diff already uses this one and it is a two way.