What Have You Done To Your 3rd Gen Today?

Thanks for the feedback. I should probably install them as well then. Cap + rocks + off road could produce some serious fatigue. I appreciate you!

 

GF? Ooof. Sorry. I was at Fairchild for 5 years - I heard the stories about "south Canada." Something about how there were hot chicks behind every tree...

 

Ooof, indeed.

Wait...

 

Do the sensors still work with the overlay?

 

We just used a lighter 99% of the time. But, now I am a adult and drink in my own home where I know where the bottle opener is.

Grab some SAE flush mount plugs for that topper light plug.

$12 Kohree 12AWG SAE Connector Power Socket Sidewall Port, 1.1FT SAE Plug Extension Cord, 2 Pin SAE to SAE Weatherproof Quick Connect SAE Plug 8 Screws for Solar Generator Battery Charger, Pack of 2

https://www.amazon.com/Kohree-Sidew...keywords=sae+flush+plug&qid=1622646515&sr=8-3

 

Hit Four 3’s on the OD today.

 

Got around to posting the pic of my Meso Hexrack

 

Switch Pro 9100 if you plan on adding more things needing switches later

 

Any link to the USB install on the DMM?

 

Apologize for the wonky photo but couldn't help but to throw this up here while I make way through the work day. Installed and have gotten plenty of use out of a new to me tri-fold hard tonneau cover. Nice to have the ability to secure my cargo when away from the truck and will suit my needs until I better my plans for a cap...or maybe it'll stay since caps are so expensive.

 

Officially SOLD and gone. Last parting picture from the bank parking lot.
I wanted to share something that I have kept under my belt. I had the Depot brand Pro headlights. Had them around 3 years and maybe 15k miles. They look fantastic from 10 feet away, however, a close up shows the tint delamination on the upper areas of both headlights. The areas with the beams, and lower, are fine but the top looks horrible. Just posting this as a heads up for anyone looking to buy the Depot brand. My Depot Pro taillights are older and have no issues. I don't remember seeing this issue with other headlight brands. If I kept it I was considering possibly spray tinting the top areas of them.

 

I used this:

$13 Cllena Car 12V 24V to 5V 3.1A Dual USB Ports Dashboard Mount Charger Blue Light for Toyota (2.1/1.2A-2)

https://www.amazon.com/dp/B01CTOKI06

Make sure it is functional before installing.

There's a write-up in the DMM thread.

 

All down hill from there.... Lol...

 

I did the same thign about a month ago and forgot to post it

 

Actually haven’t driven it yet, but everyone else I’ve heard of installing one has had no issues.

 

https://www.tacomaworld.com/threads...cessory-mounting.565951/page-50#post-25511481

 

PSA, for anyone interested, @OVTune received permaban today. See here. Contact a local tuner (or the dedicated forum) for continued support.

 

I built this fridge or cooler (in my case) slide for my rear seat delete platform. Makes it a bit easier to access the good stuff. Check out how I made it in the link below.

https://youtu.be/sJseUj00u9I

 

I didn't understand the reason

 

Assuming it has something to do with "support after the fact" with site members, based on reasons that previous venders were given the heave-to.