What Have You Done To Your 3rd Gen Today?

This is a computer VGA(video) cable. You only have to route this single cable through the firewall.

 

Mine came in yesterday, originally quoted 10-12 but nationwide shortages on fiberglass and the black resin for overland caps pushed it back to 16 weeks. Got it installed yesterday.

 

Could always get one of

$37 Cell2jack - Cellphone to Home Phone Adapter - Make and Receive Cell Phone Call on Your landline Phone Free

these and install it at another jack in the house and use the home phone through your cell phone.

 

Would rotary work with the existing technology? Also I almost got one of these Bittel Vintage Phone with Volume Control, Home Phone with Big Indicator, Retro Phone with Extra Loud Ringer, Corded Phone for Hearing Impaired, Ash, Black, Red

$60 Single Line Corded Desk Phone with Red Indicator, Retro Phone with Extra Loud Ringer, Old Style Desktop Landline Phone for Home, Hotel, Office and School, Ash, Black, Red.

https://www.amazon.com/dp/B08TCJ21P4/ref=cm_sw_r_cp_api_glt_fabc_19NK4V89PB9ASSHGPJ3X

 

I think the last time we had a rotary phone in the house was when we still lived in Georgia. We moved when I was 7.

She works at the hospital.

She can prescribe drugs, though.

 

We still use pretty old tech in Range.....

 

So honestly speaking I went overkill to start so I bought a Switch Pro 9100 and a PowerTrays setup right after I bought my 3rd Gen. This was mostly because I knew I was going to do a lot of wiring as this is my 2nd Tacoma and I love having lots of lighting. The tray gives the ability to add on without adding a rats nest of wiring like I did with the first Tacoma which I eventually ripped all the wiring out when I added a PowerTray to that one too. I have also since added an Off Grid Engineering dual battery setup and isolated all the accessories to the second battery.

Here's a pic of it. Probably could have done it a bit cleaner

 

crack your windows...lol

 

I like it! What color is that paint you used?

 

Is this better?

 

I have the same story as you- brought mine in 2/27/21 for the fuel pump recall and expressed concerns with the bubble. Advisor said that he’d look into it. I just have t heard anything back.

 

Greatly appreciated! I like the idea. I have a Barc Red Sport & wondering what these might look like on it. Thinking about a few inches below the "Tacoma" below the trim fold

 

Yes apparently it does. Found this site a while back.

https://www.oldphoneworks.com/

 

They are typically mounted up higher as an impact point to prevent door dings. You might double check before mounting them lower if car doors would actually hit that low or if they would hit higher up on the door. My sliders protect the lower part of the door.

 

Did the BHLM to my 2021.

Definitely worth the effort, especially on a silver truck!

M3 Work Round 10 by Michael Rickerd, on Flickr

M3 Work Round 10 by Michael Rickerd, on Flickr

 

You use a heat gun or oven?

 

Welcome. This particular model is meant to be on a flat surface right above the emblem. Per instruction. I was going to put it right below where the body protrudes out more but this model is too thick for the curvature. Sportwing has a thinner version for the lower body part. I also believe this one might/will protect from most/some vehicles and most four door sedans (rear wheel well door edge). Plus, I have the 2nd Gen running boards. You’ll be happy with their color matching. I can’t even tell it’s there.

 

I got an alien gear holster. It’s switchable, adjustable, and covers the trigger. Plus it’s an easy draw and sits at a comfortable/natural angle.

I bought one for my Glock and Sig M17.

 

Mine won't charge through the Otterbox on any Qi charger I have tried thus far.

 

Oven. If you search for my username in the BHLM thread you can find exactly how I do it.

Or, I can do it for you. Just let me know.