upTOP Overland Racks and Accessories - NOW WITH FREE SHIPPING (CONUS ONLY)

If you have a better photo send it over to me, I would like to use it!

 

I have Yakima rails on the camper shell installed. The installation can be tricky. I ended up using the spacers provided by uptop to level the rack. The rails are not leveled thus my passenger side is lower than driver side.

 

Has anyone here put the alpha ex tacoma cap rack on a mid height truss? wondering what it looks like

 

Just love it. And my Baja Designs rock roof lights and Meso mounts are coming next week.

 

Just got an email yesterday that my bed rack is manufacturing, waiting for production. Looks like I’ll be closer to the 12-week lead time. Can’t wait til it comes in!

 

Got my shipping notification. Should be here Thursday. Ordered 27 March.

 

Looks sick! Let me know how the rock light install turns out

 

I was too cheap to buy the regular meso mounts so I got some 3D printed ones and mictuning lights from delatorre designs.

 

Saw an Uptop post on Reddit today in ToyotaTacoma.

 

That looks awesome!

 

Finally installed both racks on the cab and camper shell. They don't level properly though so I need to make adjustment in the future. For now, I am just happy to have them on my truck.

A few notes:
1. If you plan to install bravo cab rack and bravo xL rack (for camper shell), install the cab rack first then your xL rack. I was too excited to install the xL first and found out that it was too forward so it bumped into the cab rack. The front cab rack position is stationary while the camper shell rack has room to play
2. For the xL rack, install the provided spacers right away at least 2 or 3 on each leg so that the side bars will not touch the camper shell roof when you install the rack. I didn't do this and I got scratches in my camper shell
3. For the cab rack installation holes, double and triple check the holes location before you punch the holes. It is rigid, so if you miss by a few inches, it will be hard for you to line up the spacers and screw it in

From the first picture, you may see it is not aligned or leveled between front and back racks. I used up all spacers, except 2 left...Also I think the xL rack sticks out too much in the back.

The good news is I don't hear any wind noise from the rack. I drove 70+mph this morning, turned off radio and hear nothing other than my tires. Pretty happy overall with this rack! Lights will come in next month i hope...

 

Starting to see upTop popping up in the ToyotaTacoma sub on Reddit lately.

 

heck ya they have been on there a while I always try and /u/ them in the comments when I see it on other posts too.

 

I added some spacers below the feet of my bed rack to make it level

 

Awesome. Thanks. Mine should be coming in soon this is helpful info.

 

Is there a lead time on the shade brackets? I didn't see one on the website, but may have missed something. It just says 12 weeks for racks.

I'm also wondering if I need to get the regular shade brackets, or the straight up side mount for a Rhino Rack Batwing awning.

NM this. I emailed you guys.

 

Anyone have a picture of the bravo xl rack with a rtt?

 

Assembled my Bravo that just came in. Was getting ready to mount it, when we got hit with some much needed rain. I could have installed it in my garage, but my wife has decided to start her own projects, taking up the whole damn thing. Well, let me clarify, she decided six months ago. The garage has been unusable since then. Gotta love it.

I'll give mounting another shot tomorrow. Rack was super easy to put together. Instructions were clear, and they labeled every hardware bag, which helps a ton. Mounting should be just as easy.

 

How long was your lead time?

 

Let me know what their response is!