What Have You Done To Your 2nd Gen Tacoma Today?

I was finally due for new tires so I made the jump from Hankook 265/75/16 to Toyo AT3 255/80/17. Only rubbing was front mud flaps at reverse so those are gone. So far liking the new setup and really digging these 4runner wheels. Like how they look and stick out enough to line up with the fender compared to the tucked in OR wheels I previously had. Now my tires fill in the wheel well more and don't look too small for my lift lol

 

Taking the mower to the shop for some warranty work.

 

Added some ajt knobs and shifter to match my seats.

 

Red seat covers

 

and a sticker!!!!

 

Got new headlights

 

Out with the old. In with the new.

 

just put the two you have on one side.

 

Those look great! Where did you get these?

 

hid retro fit kit . Com

 

Put the stock headlights back on — much better pattern.

Oh…and got 35’s mounted

 

Don't have SPC UCAs, so can't speak to that. I bet there are specific threads just for that if you search for them.

Looks like you are only rubbing at the bottom of your CMC? You could cut it up more and angle it down and back, versus using a flat plate. I originally went the flat plate route for 33s, but when I jumped up to 35s I rubbed there again, so redid my CMC as described. See photo below.

 

Exhaust reroute and RCI transmission/transfer case skids to complete the trilogy.

 

Replaced all 4 O2 sensors along with the center carrier bearing, no more P0420 but still have that take off shutter. As a bonus a buddy of mine traded me his steering wheel controls + airbag



Wheel controls beat any knob

 

I'm not fully opposed to this. Ha!

 

Looks great, I’m about to do this one. Did you go with steel or aluminum?

 

I wanted to do some stuff today, but things went a little sideways.



Turns out you can’t do the standard mods needed to install the Expedition Essentials compressor mount on the passenger side without relocating the AC power outlet. I now have one of these on the way:
https://expeditionessentials.com/products/toyota-tacoma-bcm-power-outlet-adapter



Broke 2 of 6 bolts trying to get everything snugged up. Neat.*

*screaming and cursing removed for brevity

 

Thanks! Aluminum.

 

Finished up @ARCHIVE new 2.0 shock relocation kit. Couldn’t find anywhere to get full flex.

 

Nice. I need to add the last two. How long was the lead time ?