Shop Time w/T.W. Friends. Where is your wallet…..poll

whooped his ass
Probably best that you didn't, putting the boots to someone nowadays ends us with 10 people posting video on youtube in 10 minutes.

 

I'm not exactly sure but given the remaining clearance the way this 2&7/8 sets in there, a three inch would still go...then it looks like it might have different adjustment that I never fooled with. Would have to get the instructions out.
Thanks, this machine does a very nice job. We have another sharpener that's used for smaller drill sizes.

 

Genuinely shouldn't have clicked...

 

One down, 5 more to go

 

Ok, more than 5 to sharpen, I get so irritated, guess that gives me some comfort he's gone now! I go to put that large drill bit back where it belongs then notice he's taken a bunch of new drill bits that kind of put away for backup, instead of sharpening the damn things! Must be why he had a pile of them setting next to the drill sharpener. He could have asked me for the tenth time to show him how to operate it!

 

I feel so violated. They took the red shell off



Someone also took the Pioneer touch screen radio (it took up the all of this space, they obviously had one and swapped the tray) and WeatherTech floor mats out of the front and back.



https://www.autotrader.com/cars-for...tBy=relevance&numRecords=25&clickType=listing

 

Traders

 

The guy who swapped the stereo probably has your red shell too!
Keep an eye out for a mismatched taco!

 

If I see it sitting up there with a red shell I will find out who it is and give him the box

Side note, I feel sorry for whoever took the shell off. It had a spray in bed liner over the rails and I put an entire tube of clear silicone on it then set the shell on it

 

I figured you'd be the guy that uses too much silicone

 

I tried the foam and it didn't work, it slowed the leaks down but the silicone is where it's at

 

The bigger the glob, the better the job

 

I'll have to remember that one!

@six5crèéd , think you'll regret getting rid of the old Tacoma? I ask because the kids be driving in a few years? I have wished we kept ours

 

So far I don't regret it, by the time Cole is driving it would have had close to 300K on it. He wanted me to keep it until he rode in the new one. I heard him tell his friend the other day "I'm so glad dad traded trucks". I really wanted a long bed Tacoma and all the new stuff is nice too. My old one needed a few things fixed and I was just tired of spending on it.

 

I took the hard top off of my daughter's Jeep and put new weather strip...and a glob or two of silicone here and there..last Saturday.

 

Ouch! That's properly fuckered!

 

That's what she said!

 

It's going to take me a few weeks to get things back in order! Yesterday I ran a lathe and had to reset much of the tools back on center, then I go to use the mill and see right away the head has not been properly trammed. Ugh, kind of feel bad for the guy...work until your done done, feel maybe a little worse for feeling relieved lol, if that makes sense. I better get back in there...

 

A whole tube Almost qualifies for implant status.