Firearm BS thread

I have the RMR dual. It works if the user dun does his part.

 

I’m inflammatory. I need not comment about funding the chicom gov whenever possible. Further more, the Holosun in question uses a 38 moa circle. It doesn’t seem useable like the Eotech’s 68 moa circle of death for 7 yards and in.

The dual you don’t have to worry about electronics…which is why it’s a good issued piece of kit. Most people aren’t pointing their RDS at the sun, and even so…Holosun isn’t Aimpoint bright, so the argument of adjusting brightness for sun is out the door.

And on and on I can go. I’ve said before, the Holosun’s seems well made and well thought out, and the market can always use competition…I just can’t bring myself to go that route.

 

The circle used on the Holosun is not like the donut of death on the Eotech. It's purpose is to help the user find the center chevron if the draw stroke is not perfect. Understanding what part of the circle you are seeing guide the user back to the center alignment.

 

need this i guess

 

I’m aware. That’s why I said it. I leave room for error buy saying it doesn’t seem because I don’t work with Holosun. I didn’t want some dude coming out of a sock drawer and telling me is good for 3.7y and in or something dumb.

My point is it’s just not necessary. Some might say don’t mess up the draw stroke can be a plus. Picking up the dot is a huge training flaw, especially on the draw. The triangle is an ACTUAL chevron. Also helps with acquisition and bringing the eye to a center point. Triji innovated most of these things. Even the gold dot, which is what I have. Some guys might need a larger dot. That will work too. To me it’s not a selling point, and can be borderline confusing if you’re use to the other reticle it was based of without training it out.

 

Wow it’s been dead in here…
I found out my P320 slide is non-millable, time to start looking at slides that have the optics cut.

 

Why is it not millable?

 

My P320 happens to be one with a slot milled alongside the striker assembly, according to this company it makes it a no-go for the mill.

 

Broken firing pin retainer pin in a Geissele M4A1 bcg with exactly 120 rounds on it. Fail.

 

Here’s my edc.

G43x
Vickers Shoe only
S15 mag
Hyve mag release
Factory Glock Night Sights
DeSantis Holster
Kershaw Ember

also have g48, ss80 and polymer80 g19. Currently building the ss80 and polymer80.

 

hmm learned something new. Thanks for sharing.

 

A little aroma therapy when a friend was visiting the other day.

 

Much awesome.

 

I used my own locks. If anyone wanted to look inside they could ask me.

I hope I never have to fly in an airplane again, unless I'm going to another continent.

 

Forever.

Metal, as in metal springs, fatigues with cycle, not static load. Consider mag springs a wear item to be replaced every X rounds loaded and you're gtg.

 

I really want an M1 Carbine.

 

That's one of three that I have. That one is an Inland that I bought from CMP when they had M1 Carbines. I also bought a Rock-Ola from CMP and a National Postal Meter that I bought privately. They are fun to shoot and have a lot of interesting history behind them.