Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

Glad to hear it.

If you’re looking to do this, always ream before you weld the gussets. The heat noticeably hardens the material.

 

That’s exactly why I bought a virgin pair of spindles. I’ll just sell my current ones with TC gussets on them.

 

I welded mine then drilled it and it still cut like butter. Used same reamer too

 

Are the steering extensions for the double shear zinc coated? I assume they don’t need any sort of protective coating, but I thought I would ask anyways.

 

Aluminum

 

https://por15.com/

 

Even better, I assumed they were steel.

 

I had Harry get mine anodized

 

The steering extensions are stainless, the only time I use aluminum is when I make complete custom tie rods

 

-1 internet point for the incorrect answer

 

Hey I got aluminum but I guess that's because I have the custom tie rods.

 

+4 in action

 

Doesn’t look like the wheelers bump stops made much contact. Will they work with the +2.25 kit?

 

depending on what position you have the arms, forward/rear location in the lca mounts they will make less/more contact. I would guess the 2.25 would be fine

 

They've been fine for me

 

Hmmm yeab it looks like it completely missed.

 

yeah looks bad from that angle for sure. Those bumps are about 2 7/8” wide and I’m getting about 1 11/16” contacting. Not ideal, but temporary as I search for 2x2 bumps

 

Speaking of which stainless sucks to machine. Just made these this week. Guess I got spoiled by doing aluminum on my last project.

 

Not sure what you’re talking about... the Haas CNC lathe said stainless was easy to machine

 

It’s totally fine, I wouldn’t think twice about it