What Have You Done To Your 3rd Gen Today?

Absolutely love the TRD Pro-style badges on the tailgate! Super creative, if I do say so myself

 

I've been trying to figure out how I wanted to mount a fire extinguisher in my truck bed. I finally just used some large quickfists and the #30 torx screws on hthete side of the driver's side cubby, it seems to hold really tight and I'm satisfied. The cubby still open too!

 

Been doing nothing but trying out the breweries lol

 

Mi fold

 

I can sleep at night again.


https://tacovinyl.com/collections/3rd-gen-tacoma/products/glove-box-key-blackout

 

I need to do this, but I think I also have to gun blue the little key flap as well.

 

So I’ve been working with my buddy (who happens to be a certified auto electrical dude) to come up with a cleaner/safer/more reliable solution for the rats nest of wires behind my switch panel.

He built a custom micro switch board and encased it in epoxy resin with clean single power, ground, and switched power lines.

Super stoked over the progress. Total cost has been about $20 (as in twenty ).

Progress so far:

 

Can't wait to see the grill installed!, I love it!

 

Of all the Toyota TRD wheels, those are my favorite. Looks awesome.

 

Where did you get the Missile Launcher switch? I need to grab one of those - that's an old Army LANCE missile launcher. I commanded a LANCE firing battery at Fort Sill, OK in the early '80s.

 

LMAO... that's what we used to call it when the weather was so bad, you'd drive on the reflectors to let you know where the lane ended - driving by brail. Yeah - Stevie Wonder loves the OEM lights. I went with the bulb upgrades thanks to all the research done by @crashnburn80 and all the others. Blinded me with science. Pretty good improvement for less than $30. That's such a douche move on Toyota's part - $400 from the factory but 3 times that at the parts counter? Hope you can get that worked out - thanks for the info!

 

aironboard switches

 

Thanks!! I ordered one. Now I just need to figure out how to wire it in so the LEDs work.

Here's what a launch looked like - this was my battery's live shot at White Sands New Mexico in 1984. The system could be configured with a nuclear on non-nuclear warhead. This was an inert nuc warhead.

 

Just found this quote on a new 2020 Off Road DCLB from February 2020 I was looking at, I didn't buy it..........wishing I would have now

 

That was a good deal! Just 4 months later I paid $6k more than that for almost the same options.

 

The only missles I launched were fur missles. Lol

 

Installed Total Chaos bed stiffeners. I don’t need them yet, but just future planning. Plus, the tie down points are great! Easy install. Used locktite and recommend using a step drill bit; that way the bit won’t jump around and it gives a way cleaner hole. Used a deburring tool and painted all exposed metal.


I cut the bed mat to fit around them, because my OCD would go crazy seeing that mat flipped up in the corners.

Next, I’ll have to get all black bolts to match!

 

What bed divider is that?

 

Nice clean setup - what's this nifty lookin' thingy?

 

Got the fuel pump recall and 30K service done. Took about 6 hours. Next up getting a tune! I'm organizing a group buy for NorCal / Bay Area for the CVC or KDMax tune. Check out the thread if you're in the area!

https://www.tacomaworld.com/threads...rea-late-june-july-2021.725089/#post-25829378