Georgia Classifieds

Sounds really wrong but yes

 

Antibody have tires in a 265/75r16 or 255/85r16? Looking for some in really good shape and would also consider a set on 3rd Gen off road wheels. I’m in Gainesville, Ga. Let me know what you have! Thank you.

 

I have some 285’s

 

What's the info on them?

 

All still have good life left. 44 pounds a piece. Never had an issue. Just went bigger and went with a MT

 

What brand are they? 44 pounds is really light for a 285. The lightest I've found was coopers that's were 54.

 

Pathfinder AT’s discount tires all terrains

 

I have these 265 75 16 toyot at3's that I put on my truck less than 5,000 miles ago so they are basically still new. They are $184 and some change at tire rack. With them being so new I'd want $145 a tire at least.

 

Hey dudes. Blew my driveshaft yesterday at Iron Gap. If anyone see’s or has one for me let me know! 2013 DCSB TRD OR. Anything 05+ should fit, I’ll confirm part numbers later today

 

Uhh, damn dude.

 

Anything 05+ that is 4wd and shortbed should work*

Might just be time to call Tom Woods and get a one-piece driveshaft.

 

See I’m somewhat conflicted on that. A one piece would hang lower than a two piece, would it not?

 

Yeah it would, one reason why I'm staying away from the one piece

 

Yes, but I don't think it would be significant enough. It should reduce or eliminate vibration though.

They don't only do single piece driveshaft. @ItalynStylion got one with a double cardan joint due to getting vibrations on the single piece driveshaft post regear.

 

Yes, but it will have less of an angle on the u-joints.

And less potential vibration issues.

 

An Access Cab truck driveshaft will work as well. A regular cab shaft will not.

 

Great points. I haven’t struggled with vibes so I’ll probably stick with the factory two piece - driveshaft clearance is pretty important to me. Although this is the first one that’s snapped in two, it’s the nth time I’ve drug it across a rock, etc. while wheeling…

I need to design a driveshaft skid…

 

Not mine....

Old man emu lift kit
Complete ARB old man emu lift kit 2”. This is the stage 3 Heavy Load. Came off my 2020 toyota tacoma. Less than 5k miles.For specs you can search them on 4wheelparts webpage.

https://nwga.craigslist.org/pts/d/jonesboro-old-man-emu-lift-kit/7337206630.html

 

Grille and grille shroud - fits 2012-2015 Tacoma’s. Painted to match the silver but it’s not quite perfect - you can notice within 10 feet that it has more glimmer to it than the stock paint. Bought it from a member who said it was a perfect match and don’t want to do the same to someone else. It has two small chips shown in photos. Just taking up room in my garage - just come get it from me for free or a case of beer.


Also selling 2019 4Runner TRD Off-road wheels/tires. 14,500 miles on them currently. Will not come with TPMS. Asking $700

I’m in Atlanta often so could likely deliver either one of these. Don’t necessary want to go much out of my way to deliver a free grille but we can work something out

 

That is metal AF. Gl man, must've come down hard on that rock. Bet you knew it when you felt it.