Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

never heard of that brand of glass are they a newer company?

 

Been around awhile I guess. Think I got mine in 2013 https://off-roadfiberglass.com/

 

ahhh gotcha never heard of them before i tried getting mcneil but the shipping on them is a major pain

 

That is the intake. Yes in the engine bay. Believe it or not, according to our 5,000$ scanner IAT’s are basically ambient. It works extremely well.

 

Not doubting you, just curious. I've already made a nice big hole in my fender for the snork to slurp some clean air from the roofline area so I'll probably keep that for now, although that looks very nice.

 

You could always connect this to your snorkel and have even cleaner air.

 

now yer talkin

I assume I could rotate that intake 90 degrees and connect it to the snorkhole then.

 

Sure can!

 

Finally can put my truck on the ground and get some bumps and straps installed. Still waiting on the bypasses though. @kasnerd I saw you’re all shined up with a new window. Thought of throwing some dirt on the tire shine to help it see dirt. All jokes aside though, @81Trekker is doing a fantastic job on your truck. It looks killer. It’s got inner fenders done so let’s see some action footage!

 

Got any pictures of your setup? I’d love to see it!

 

yup, click on my build thread

 

were you grinding a bucket of grease ?

 

Grinding after the boot gave out on the CV and slung grease everywhere.

 

Same thing happened to me on the trail.. put it in limp mode till I got back to camp. My solution was going with an Airflow snorkel after that. Havent had any issues since... but I do plan on adding a Pre-Cleaner to it though for a little extra somethin'.

good to hear. I have a stack of fresh 35" Baja's waiting to go on. Got the D rated ones.. curious to see how they do. I'm used to Load Range E.

I think the JD rack is going to happen sooner than later.

 

Dam.. I’ve been pretty set on Fox 2.5 mid travel but I keep coming back to this thread. I’m thinking of just pulling the trigger on the 2.25.

I see the website has kings, is there a fox alternative or would I just have to order them from accutune?

 

I think if you call the shop they have the specs for Fox shocks available.

 

This was posted awhile back relating to fox shocks.

 

Found a way to clear the u bolt plate and not have to get a welded loop. Everything goes on tomorrow and I was happy to find a perfect shock mount spacer.

 

Can anybody direct me to what page the rear end stuff starts on? Would really love to read up on this SUA kit, but 300+ pages is a bit much to sort through!

 

I can't wait to see those implemented.