What have you done to your Tacoma today? 1st Gen Edition

it should not have been an issue. As Dan indicated, there's something up with that pump.

That would put it more on what's up with the idle, that it stalled but not because it ran out of fuel.

Maybe it's the heat here. the redhead is pretty pampered....

 

Shit.. I need to try that when the red one goes under the knife.

 

Unknown.

I did recently swap out the original MAF with a new denso unit. If I was to nitpick, I'd say the original MAF is a little better than the new denso.

 

Naw, basing it on the inconsistent idle behavior. The new MAF had no impact on that. Also been monitoring fuel trims. While not bad, I would say with the new MAF both long-term and short-term trims are not quite as disciplined.

All in all, what that tells me is that the MAF is not part of the inconsistent idle RPMs.

 

@SiberianTacos

What seat options did you go with

 

you having any trouble finding parts?

I ordered my Kings in March
Not getting them till April 2022

They’re blaming it on not having parts

 

Beautiful!
Your truck is coming together nicely.
Love the Impulse Red

 

LED instrument panel lights!
JK…Awesome mile stone

 

Yes

 

Thanks man!

 

Congratulations. If you ever get the chance to try GMRS radios. They have crazy range and clarity compared to cb. And there in a pretty small package .
You can see it on my dash.

 

No, I just ordered it from down south motorsports. They are good about getting parts out quick.

 

Finally installed my 06 Forester seats. The grey matches almost perfectly.

 

More info please!! They look great and appear to be scads more comfortable than my well worn bench seat. How difficult was it to bolt them down?

 

I Had my alternator shit the bed driving home yesterday afternoon. Good thing for my cascadia solar panel I think. Was able to get it home with no radio no AC (35degrees with a 3year old complaining) pulled in the driveway with 11.0 v left. Threw a new one today. Now I’m just waiting for the next thing to break down…

I attempted to swap in an 03 RAV4 steering wheel. All good, but I just couldn’t Get the airbag in and leave space on the springs for the horn… after an hour fiddling with it I gave up.. I guess that’s what I get piecing this together from eBay.

 

ive seen guys swap camry wheel before

 

Yeah, seen it too. I Got the idea from here for the rav4 wheel, but the airbag just won’t work out. I mean I can just pull the fuse for the horn lol.

 

i dont have a horn at all. had to take off to give room for the intercooler and ive continuously "forgot" to replace it for 4 years and counting

 

He fixed the extension. He even angled it to my liking and added a gusset for extra support. I probably should've shortened it another inch, but these are 33x10.5s, so 12.5s would fill it in a little more.
Then welded on these shackle mounts I bought several months ago. 2 up front to my All-Pro front bumper, and 1 to the left rear bumper.
Gave him an extra 40 bucks for doing this.

 

Finally got most of the truck done.