TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Yah I was thinking the same but I have it so ill give it a go. i will eventually get a new rear end so figured its going to happen in some form anyway.

 

Only thing that kind of stinks for the Tundra or Sequoia master upgrades, is that if your truck is a manual, then you need to have a separate reservoir for the clutch.

 

just grab the parts that are on a +09 offroad with atrac. they have a separate system for there stuff and should just bolt up

 

Really? Picture?

 

here is a pic kind of. you can see the cap protruding out the fuse panel. this isnt my pic. its @6 gearT444E truck.



also. parts diagram

 

might run into space with the intercooler resi, but this should be a possibility

 

Yep, same here. The 6-piston, 340mm rotor StopTech BBK has stopped my fully loaded truck (6100lbs on White Rim Trail) way sooner than I expected. I have no plans on EVER "upgrading" the rear drums unless I upgrade the axle.

 

Do the sequoia and tundra mc work with the electronic traction control features?

 

No. If you have an off road model or pro you can’t do the swap without losing those features along with abs.

 

Yeah I thought that was the case , I did the 4runner big brake conversion , & just learned to live with the softer brake pedal.

 

Finally got my hands on hardcopy FSMs. Call me old school, but I'd rather thumb through the pages on the workbench than scroll through a PDF file on a screen.

 

Same. But I still might do the swap and ditch all the electronic nonsense sometime next year. Big tires, heavy truck, and aggressive driving warrant me having some better brakes

Or I’ll call willwood or something and get some sort of custom master cylinder and brake booster setup. We’ll see

 

If you don't mind me asking, what did those cost you?

 

Where did you find them?

I would like to have a set for my 2015 - but I'm not sure they ever printed any.

 

I might try slapping my Wilwoods on this weekend. 09 4x4 off-road automatic. Hoping I don't need to upgrade anything else.

 

Hey for those that have cut your hps hose (for a temp gauge) have you had any issues? Leaks? Etc…..I have a temp,gauge in my upper hose but still haven’t switched to the hps hoses. I’m waiting on feed back.

 

No issues here but it relies entirely on the quality of your cuts and the sealing integrity of the hose clamps you decide to use.

I used OEM Toyota clamps for mine and it's been dry since the day of the install and I do not foresee any issues from that section of my cooling system setup for the life of the parts used.

 

eBay has them. Basically a printed out copy of the online pdf that was once hosted by customtacos (you can still find it if you look hard enough). Not the actual Toyota print. I have a copy. Very useful to have on hand (instead of getting my laptop all greasy).

Edit:

here you go
https://www.ebay.com/itm/2010-Toyota-Tacoma-Shop-Service-Repair-Manual-Complete-Set-/153585422538

http://web.archive.org/web/20080731033603/http://www.ncttora.com/fsm/

 

Swapped my rears out for the anodized flat black. Can’t wait to get matching front

 

$360 on ebay

AFAIK Hardcopies were only printed up to 2010. I have a 2015 but it should be 99% compatible