What Have You Done To Your 2nd Gen Tacoma Today?

Is there much weight savings with the 2 piece rotors?
Is it 16'' wheel compatible? Most. They have a template you print and check with.
My wheels wouldn't work except I have 1" spacers and it works.
Could you share part numbers? Yeah... I'm cooking so later on

 

I cerakoted my truck in air cure OD green and DOD 20150. Also cut tye front fenders.

 

Where did you buy your shocks if you dont mind me asking?

 

I've got these hanging around after changing to a fake pro grille. Top is the original full grille with "chrome" surround. Bottom is a brand new insert, no surround. From a 2015 TRD Offroad.

 

Installed 1 new clip in the bottom of each fender. I ordered 6 new fender liner clips and put the 2 remaining ones in this morning.
I need to install the rubber strip that goes between the fender and door on the driver and passenger side. I got new clips for that but it's been raining all day.

 

selling the lower one?

 

I’ve got the center from my ‘15 sport, no surround tho

 

Sure. Send me a message? I'm still new to this site...

 

Nice! From the looks of the installation, I think you did the same thing that I did with mine. There appears to be a slight cant on your pod, meaning you will have to use the other screw hole instead. Typical installation instructions tell you to use the top screw hole, however if you flip the brackets driver side with passenger side, you will need to use the bottom screw hole. Take notice at night if you have an arc in your beam, if you do this is the problem.

 

Kudos to CaliRaised for their great customer service. My previous light bar developed condensation inside the lens that would not go away, probably from a failed seal. The light still worked fine, but the condensation bothered me. Unbeknownst to me, the light bar has a two-year warranty and they sent me a brand new one. Swapped them out today.

 

@JakeSeig - I’ve got just a 13’ grille insert (not the surround) from my TRD Sport that’s available if you’re interested?

Is that what you were referring to by TRD grille? Or did you mean TRD Pro Grille?

 

Did the best I could to get them cleaned up, sanded and resprayed. Definitely not the same as removing bolts-ons and spending time really cleaning them up the right way, but whatever..













Happy that's done

 

Whoa good catch. I did use the lower screw hole. I will find a good spot to get them aligned properly and adjust as needed. Thanks!

 

Black TRD rear stickers and black badges. Sorry for the crappy pics. It was at the end of a long hot day and I just grabbed these on my way to get a shower. ( Because everyone loves pics... even crappy ones)

 

7100's from Marlin's
6112's from Shock Surplus

 

I REALLY need to do this.

 

Isn't fun, but I'm happy with the results. Plan is to maintain it for the next few years while I learn to weld, cut them off, get another pair and reweld them on myself.

 

Happy 4th of July everyone!

 

Watered some newly planted shrubs at church. Not close to the building so I used the bed's outlet to power a sump pump. Happy 4th !!

 

Didn't exactly see a part number but this is an option I selected.
TR-325 2 Piece Slotted Rotors fit 16" wheels
They are: NEW 6 PISTON FRONT BIG BRAKE KIT fits Toyota/ Lexus TRUCK & SUV
https://sosperformance.com/products...-brake-kit-fits-17-plus-wheels-2005-21-tacoma

FYI, they offer a larger front piston for heavier trucks.
From what I understand the front piston is typically a little smaller than the rear one.
In mine they are the same.
Think its new and Tom from SOS Performance called me right after I placed my order to discuss it with me.
Tom was awesome.
I had corresponded with him several times over a couple months and he would even respond on a Sunday evening.