1st Gen Lunchtable Thread - General Discussion

lol I cleaned out my cooler to put some drinks for the concrete guys in it tomorrow. My neighbor came over and asked if he could borrow it to do the same.

I guess I need to get some more Modelo

 

Yeah, I got that vibe. They know their boundaries though. It sat in my driveway for a while and never disappeared til I put in in the bin. I have some other metal stuff sitting in the drive that hasn't wandered off yet either

 

This wasn't the axle roommate axle was it

 

Ha, if I had any idea you were interested I would have asked.

 

Nah.

That axle lives on in another 1st Gen Tacoma now

 

Maybe weld them to the frame 1st then notch the over shell to fit?

How much for a set of thows leaf hangers. I need to do this my deavers. They are longer then stock for a 97.

 

They have to get set into the frame about 1". So I have to cut a chunk out. They're extra stout for frenching. They're also way too wide for Toyota leafs, I think they make ones for Toyota leafs though. Check RuffStuff specialties

 

I was looking at the trail gear kit.

 

Those should work afaik rear leaves have been the same width since 85 or so. You could cut yours off and move them too

 

I bought a set of these before I decided to do 63s and they're fairly stout. 3/16, they're welded together though, not brake bent

 

I was on the fence about welding on gussets to the stock ones with new mounting holes.

 

That's incredibly hard to do, I just removed some and to get them off without spending years, you need to kill em

 

Grow up poor waste nothing

I'd be checking if ruffstuff or Barnes has some weld ready hangars though. Time is more valuable now

 

That angle on the side not cause fitment problems?

 

It centers em on the thinner pickup frames. You have to shave it a tiny bit to get center on a taco frame

 

$65 for just the housing…. If it’s not rusty as hell I’ll be grabbing that.. then finding shafts and a third

 

Good to know.

 

What's the holdup?

Shafts and a third are pretty standard for most orgies

 

Lol. The housings a bitch to get from a pick a part. Axle shafts and the third not so much. So I’ll jump on a 65 dollar housing if it’s not rotted

 

Man I would have shipped this one to you if you paid shipping.

Next time