take a look here

Well I ordered my jd2 bender should be here soon got a new set of uppers and lowers cut out going to put together one side first just need more time in the day

 

Damn I need one of those

My life story

 

just checked the tracking info... the bender will be here on monday!!!! just in time for my weekend

 

this is all that i got done today.

new arm on the jig ready to go


new arm welded up needs only to have the braces welded


and finally the bender came in

 

Did you melt the bushings?

Look good so far!

 

yeah lol i didnt want to pay for mock up ones cause there like 30 bucks a piece so ill just put thr melted bushing into the next set and get a new set of bushing for this arm lol l

 

Oh lol

I made my own mock ups with a piece of smaller tubing and some washers welded in it

Be careful not to melt the lining in your uni-ball that a little more expensive

 

yeah i think the balls are fine they still move freely... i may have warped the cup alittle cause i cant get the damn thing out but ill get a bgh and take care of that down the road

 

Yeah I've got a press but I still use the BFH

I made the uni-ball press tool I'll send you a pic later

 

sweet ill be messing around with the new bender today... with bendtec pro and a new bender there shouldnt be a reason i cant crank out two b pillars for the truck

 

Nice job man! i'm currently doing this same thing

 

THIS IS THE PROJECT THAT LASTED FOREVER! ????????

Let me know how those anchor bolts work out.

 

why you being a douche nozzle and im stuck again because of the shitty quality of tools i have available in this town i got maybe an inch in all the holes with the 2 bits i bought

 

Slow down and use lots of cutting fluid I use harbor freight bits that last way longer than that

 

im using master mechanic brand the first bit was doing ok then i got down deep and i sheared one of the edges off the other is just dulling really fast

 

Wait are you drilling concrete? lol Disregard the cutting fluid statement. If your not using a hammer drill then you gonna have a hard time

 

yeah i know but ive got all that i have available unless i can steal errr borrow one of the tractors out side my house

 

Rent one from home depot

 

He is drilling anchor bolts into concrete. He isn't drilling metal. So cutting fluid isn't really gonna be the issue.

I would suggest getting a hammer-drill, a good bit and a vacuum.

But what would I know? I do it for a living.

I am not a douchenozzle. I am douche-do. Like a douche, but fun like a dildo. Not quite as good as a Droid-do. Hmmm.....Are they waterproof?

I can't wait for the video......

 

Is there an echo in here?

Not sure yet