Tire pressure not showing after resetting TPMS

Hi. Just changed my tires 2020 tacoma trd offroad and when I got the truck back the truck was reading the tire pressure of the 4 tires, just the reading was in the wrong position, for example the front left tire was showing the rear right tire. So I reseted the tpms system like the manual says. Now even after I drove like 200 miles the system does not read the pressure of any of the 4 tires. (Know the sensors are working because I checked them with a tool and I even lower the pressure and the light comes on but not showing the value for the pressure of any of the 4 tires) Any advice please.

 

Have you asked the stealership to calibrate them? I had this happen, and I just did the process multiple times and it "self corrected"

 

Did not go to the dealership yet. Gonna have to go. Thanks

 

Mine was wonky for about the first 50 miles after getting them swapped to new wheels. As mentioned, they self-corrected and have been fine since.

 

Let's see then. If not I am gonna have to go to the dealership. Thanks

 

Another option is Discount Tire. They will probably charge, but may be less trouble than the dealer.

 

Thanks

 

Yep, normal as long as you have the OEM Factory TPMS in your wheels. Follow the owner's manual for the correct TPMS button procedure.

 

Good call. Page 426.

 

Had similar problems even with following the owners manual and also paying a tire store to "fix" the problem, which they couldn't. Left the tire shop figuring I'd be going to the dealership later in the week and before you know it the pressure numbers turned on. Just took much longer than the OM suggests it should.

 

so what actually fixed it?

 

Time