What Have You Done To Your 2nd Gen Tacoma Today?

Silly question,
does the ADD need to be deleted with the locker install?
Thanks.

 

6112 plus top spacer... sayonara CV boots.

 

No, the ADD delete is just a way to remove some electronics from the process. I decided to knock it out since I was swapping front diffs anyway. This fall I will be installing an FJ case which will be one more actuator I will remove from the process. At that time I will either go air locker in the rear, or do the Elocker anytime mod(depending on how broke I am ).

 

Mines grounded to the bolt holding the seat down.

 

Down to cape cod

 

Nice! Where di you buy these?

 

]

After the first shock was installed I realized this was a problem. The previous owner had installed the spacers and I was not familiar with that initially, and was freaking out when my UCA wouldn’t stop rubbing on my spring. Luckily Autozone carries KYB top hats

 

Don't like you went for turd gen but damn $2k for 9 years of driving! That's just crazy! How many miles did you put on it?

 

Which Jackery and Fridge is that?

 

Explorer 1000 and a cheap Costway from Amazon

 

Two layers of spar urethane, two more to go. Should be cured up by tomorrow afternoon, if weather cooperates I’ll drop this in behind the back seat.

 

Bought it used with about 15000, had about 58000 when I handed it over. Had planned it to be my “keep forever,” but between the white paint heading south in a hurry the last year or two and the crazy trade in amount, I figured time to let it go.

 

ive gone throught the back window and onto the dashboard before.

 

When I changed mine out, I got mine from Amazon.

 

For all of the other 2nd gen. hockey players and fans. I made a hockey stick butt end gear shift knob.

I also got a new sticker since I am the Zamboni operator too.

 

Idk it looks high enough to give you a penalty for high sticking.

 

Finally got my lift on... Now I need to get it aligned

 

i did the same thing...i had the paracord handles, but the clanking got annoying

 

Yeah, this is my first attemp / prototype. I am going to move the insert up in the shaft to lower it.

 

I get kinds of tires from lawnmowers to mud tires. Even rims when they are shipped individually that is.