2015 Fog light install

I have a 2015 Tacoma SR5 that is prewired for fog lights. Currently trying to install Cali Raised fog lights. I’ve plugged the fog lights into the pre existing connection. Wired in the switch and installed a relay and they still won’t turn on. What am I missing?

 

LED? reverse the polarity on the fog light wires.

 

double check that your headlights are on.
the fogs wont turn on unless the headlamps are

 

How did you wire the switch?
The OEM Switch - Grounds the relay for activation.
If you are using the OEM relay, that may be the problem.

Also, the Headlights need to be on Low for the Fog Lights to work.

 

And the required fuse.

 

The wiring is there. The relay is not. Did you add one?

 

Relay added in correct location?

 

Yeah I did and from everywhere I’ve looked it’s in the right place.

 

Last attempt: Driver's side low beam headlight working? If fuse is blown to it the fogs won't work.

 

yes sir

 

Yeah that’s where I put it.

 

And the switch is OEM also?

 

No, aftermarket switch. The light in it is working so that’s cool I guess lol

 

Fuse under dash panel?

 

Nope, fuse is in engine bay fuse box.

 

How did you "wire" the aftermarket switch to the vehicle connector in the dash?

 

I’ll send pics of everything I did in a bit. From what I remember. Blue to blue. Black to black/white(ground) red to green and yellow to green/white

 

That be the problem...

 

Blue to Red
White with Black Stripe to Green
Green to Blue
Green with White Stripe to Black