Raptor Lights

I installed my raptor lights on my 2021 tacoma off road. The raptor lights are on but the headlights on the passenger side are not completely on. Any recommendations?

 

welcome aboard.

Check the fuses? Raptor lights...the "nose ring" of Tacomas

 

Need more info, how did you wire up the lights? did you tap a fuse? or piggy off a power line? what do you mean by, "not completely on"

 

I used the connector with the 15amp fuse and negative to ground terminal. The headlight is on but the low beam wont turn on on the passenger side

 

so you spliced the headlight? is that my understanding?

 

Yes, I used a circuit Fuse tap

 

I would double check that connection---seems like it didn't make a tight connection. Usually i prefer to tap the fuse box, it makes a better connection

Edit: Oops sorry i just re-read and saw you did use a fuse tap, which fuse did you use? If your driver side works, and passenger is out, check the connection, could be a coincidence that its out, or perhaps the bulb went out

 

An add a fuse*

 

If you want to, you can wire it to the 10A INJ fuse because that works too with no issue.

Tullie D (RIP) made this thread about wiring raptor lights https://www.tacomaworld.com/threads/efi-3-vs-inj-fuses.602078/