Anyone got or getting the new icon rebound wheels??

I spoke to my local Discount Tire (who I ordered the rims from online) and they said they have a retro fit kit for the sensors that should work no problem. They said the fitting for the stem is slightly different so the retro kit is needed. Taking it there this friday.

 

My new ICON Rebound Titaniums with Wild Peaks in 265/70/17. NOW it's starting to look like a truck!

 

That looks nice! I want mine to sit like that, do you have a lift or leveling kit?

 

It's a bummer they haven't figured out what Toyota did years ago with their faux beadlocks by giving a relief channel on the back for water to drain out with gravity.

 

Damn that looks nice! can you share the details? What you have for suspension, tire size, and what you went with on offset?

 

No, I'm stock suspension. I do have some rub at full turn on the mud flaps, so I'll have to work on that. The ICONS are a +0 offset so they widen the stance a little over an inch on each side vs the +30 with the OEM wheels. It seems to have a leveled look to it though with the new setup

 

NIce! It does look more level than stock, i know the tires shouldn't change anything with the rake but it does look like a leveling kit. Looks good, i think i'll start the same way and eventually do a Revtech 427 leveling kit. I don't wanna sacrifice my daily driving for looks. I know they look cool with a big lift and big tires, but i'm fine with a little bit of an aggressive look and still keeping driveability. I think the way you have it with a leveling kit would keep the look, and no rub.

 

Any links to lug nuts used? Icon says sont use e.t. lugs .im assuming 60 degree acorn 12mmx1.5 splined tuner lugs would be best bc they are thinner? Or will regular 60 degree acorn 12mmx1.5 work?

 

This is the set I got on Amazon.

 

I used these...

$38 Gorilla Automotive 21134ETBC Black 12mm x 1.50 Thread Size Chrome Finish Small Diameter 6-Lug Kit, (Pack of 24)

https://www.amazon.com/dp/B00SF8FF86?_encoding=UTF8

 

I just got my icon rebounds in but still waiting on the tpms sensors from custom offsets to come in the mail.not sure if they come with stems or.not ...does anyone know what size valve stems they use and if the way these rims.mount the tpms is the tpms with the valve together or is the valve installed and the tpms sensor mounted on the other side? Ive seen some aftermarket rims are like that and as per this thread ive seen some have issues with tpms sensors and the angles ot what not.any and all info to make sure I get a good install with no issies is appreciated .im about to order some non extended thread lug nuts .custom.offsets told me.i needed e.t. lugs and icon told.me.dont use em .i ask icon if they have a link to what to use so they send me a link to e.t. lugs write em back and they apologized and sent a sifferwnt link to non e.t. lugs spline tuner lugs 12mmx1.5 but some of the kits come with chrome stems and black lugs so id like to know the size to search for black stems ..appreciate any and all info

 

My factory TPMS sensors worked just fine with my Icon Alloy Rebound wheels. No issues at all. Tire shop said the only time it’s an issue is when going from steel to alloy wheels, otherwise it should work without any issues.

 

These look amazing

 

Find a thorough review of Icon Alloys here: https://www.topclassauto.com/2022/07/tacoma-icon-wheels.html

 

Find a thorough review of the ICON Alloys here: https://www.topclassauto.com/2022/07/tacoma-icon-wheels.html

 

Put these on my stock height 2022 TRD off road I bought last year in may. Love the look tires are 265/70 17” offset is 0 and backspacing at 4.75” and no rubbing anywhere. Plan on a level kit in the spring