What Have You Done To Your 3rd Gen Today?

Got my PowerTrays delivered today, and mounted my Switch Pro

$659 SP-9100 8-Switch Panel Power System With Concealed Mounting Hardware

SP-9100 module to it.



Dropped the truck off at an interior shop to install my LeatherSeats.com car seats FINALLY. i've had these seat covers sitting in my dining room for 3.5 months waiting for an opening to get in. Looking forward to that nice perforated leather in the truck, classing it up a bit.

Once the truck is done, i'll likely be installing the power tray bracket, the two high amp circuit breakers, and re-wire all of my powered accessories to the terminal on the tray.

 

I thought I had more pictures... But here are a few from a project I started before a trip up to the PNW.

Alu-Cab w/load bars a-la-McMaster, bed platform, onboard water, secondary battery w/an old Renogy panel I had laying around, with a 1000W inverter for a coil heater to warm up some water for showers. Oh, and passenger side rear seat delete, where I now have a 45 quart Whynter fridge on the house battery. Cold beers ready to knock back wherever I go.

The platform is kinda still in the works, I haven't had time for much as of late. Y'know, life.

 

Thank you. Had it made.

 

Ouch

 

So, yeah, ya know that bottom body pinch weld, usually painted same color as body? So, I made mine disappear, painted black with RhinoLiner. From 10’ it’s like it’s not there.

 

Welcome to Tacoma World

First thing you should do is give your credit card to someone you trust and never return here, TW is the most expensive free subscription in the world.
We like to
Nice ride!

 

Welcome to Tacoma World Sharp ride

 

Deck Decal is awesome.

 

He’s right just spent 4100.00 for rsi smart cap and rci transmission and transfer case protectors. It never @&##@!! Ends .

 

Installed the Hooke Road tailgate panel that I ordered from Amazon.
It fits well and I have no issues closing the tailgate.

$140 Hooke Road Tacoma Flat Tailgate Cover Panel Table Plate Pad for Toyota Tacoma 2005-2023 (2nd & 3rd Gen) - Black

.

 

Nothing crazy yes but I got the tailgate inserts and American flags on today

 

Finishing up this install tomorrow inside a friends garage. Can’t it ever stop raining here in New England .

 

I like your bedside decals!

 

Did a little fishin

 

Applied Paint Protection film to the door cups. Easy 10 minute install. Had some left over solution from screenprotech. Toyota part # PT90735190DC

 

I am noticing my women who ride in the passenger side have started to mess that area up a bit. Not a bad idea at all. The same thing is happening on the center console where they plug the seat belt into the latch. May have to grab some of that stuff.

 

AC compressor seized - just got it back from the shop. Also picked up a new battery and installed the OGE battery hold down. It's so BURLY compared to the OEM, heh.

 

First time ever tinting anything, bought some VViViD taillight tint on Amazon for 10 bucks and the process wasn't too bad. Had to learn as I went but I'm happy with the way it turned out. Tinted my mirror turn signals and fog lights. Got plenty left over will probably do the 3rd brake light on the cab too. Might even buy more and do the headlights and taillights too.

 

Not installed yet but ordered a Blaze Offroad wired switch pro can't wait for it to come in !!! I will be ordering a bumper/winch/twin ARB compressor/and 2 S8 Baja light bars to go with it.