1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Air vent cover

Discussion in '1st Gen. Tacomas (1995-2004)' started by tcrain4x4, Jul 17, 2021.

  1. Jul 17, 2021 at 7:30 AM
    #1
    tcrain4x4

    tcrain4x4 [OP] Member

    Joined:
    Jul 17, 2021
    Member:
    #371494
    Messages:
    13
    Gender:
    Male
    First Name:
    terry
    Arkansas
    Vehicle:
    2001 tacoma 4x4 trd
    fabtech lift
    I am missing the passenger side ( Right side) air vent cover.. Any one know where I can locate one? All I’m seeing on eBay is the one for the left side (driver side) . Thanks in advance

    AC9E5DA1-16F6-419F-B8DD-8C9B736AD7C2.jpg
     
    This site contains affiliate links for which the site may be compensated.
    #1
  2. Jul 17, 2021 at 8:42 AM
    #2
    Black DOG Lila

    Black DOG Lila Well-Known Member

    Joined:
    Jun 14, 2019
    Member:
    #296344
    Messages:
    9,116
    Virginia
    Vehicle:
    2003 Tacoma SR5 2.7 5 speed 4WD
    Stock. EZ pass.Dump pass.Inspection sticker.Convict printed lic.plates.FG cap.
  3. Jul 17, 2021 at 9:44 PM
    #3
    UtahTacoma02

    UtahTacoma02 Well-Known Member

    Joined:
    Dec 5, 2014
    Member:
    #143730
    Messages:
    691
    Gender:
    Male
    First Name:
    Dave
    SLC
    Vehicle:
    02 Tacoma Double cab TRD Limited
    ARB front bumper, Old Man Emu suspension, on board air compressor, on board hot water converter, cb radio, safari snorkel, warn 8K lb. winch, AP rock slidders/rear bumper, gray wire mod
    What color is your interior, tan or grey? I have one but has a broken tab on the side. It will still pop in and you dont see the broken tab when in place.
     
    tcrain4x4[OP] likes this.
  4. Jul 18, 2021 at 6:45 AM
    #4
    tcrain4x4

    tcrain4x4 [OP] Member

    Joined:
    Jul 17, 2021
    Member:
    #371494
    Messages:
    13
    Gender:
    Male
    First Name:
    terry
    Arkansas
    Vehicle:
    2001 tacoma 4x4 trd
    fabtech lift
    My interior is tan .. that's awesome.. what would you want for this part? UtahTacoma02
     
  5. Jul 18, 2021 at 12:09 PM
    #5
    UtahTacoma02

    UtahTacoma02 Well-Known Member

    Joined:
    Dec 5, 2014
    Member:
    #143730
    Messages:
    691
    Gender:
    Male
    First Name:
    Dave
    SLC
    Vehicle:
    02 Tacoma Double cab TRD Limited
    ARB front bumper, Old Man Emu suspension, on board air compressor, on board hot water converter, cb radio, safari snorkel, warn 8K lb. winch, AP rock slidders/rear bumper, gray wire mod
    Mine is grey unfortunately. Shipping cost would be all I would need. I would just wait to find one that matches your tan color if I was you.
     
  6. Jul 19, 2021 at 4:22 AM
    #6
    tcrain4x4

    tcrain4x4 [OP] Member

    Joined:
    Jul 17, 2021
    Member:
    #371494
    Messages:
    13
    Gender:
    Male
    First Name:
    terry
    Arkansas
    Vehicle:
    2001 tacoma 4x4 trd
    fabtech lift
    My vents are black. But I’m not worried about color. I just need the vent.

    CA06808D-95F4-4FCF-ABDC-B462EB38E08D.jpg
     
  7. Jul 19, 2021 at 10:11 AM
    #7
    yotadude520

    yotadude520 Well-Known Member

    Joined:
    Dec 10, 2020
    Member:
    #349212
    Messages:
    337
    First Name:
    Will
    The Dirty T
    Vehicle:
    1986 Toyota Land Cruiser
    OME Lift - FJ62 Axles - 33x10.50 BFGs
    So you can buy them on eBay or you can buy a brand new one from the dealer. Part # is 55660-04030-B1

    Since there is not much online about replacing one of these - you need to remove the glovebox, the duct behind it and the top of the glovebox. There are three screws holding the vent in. The first two are easy but the last one is very difficult to get to but can be removed with some contorting of the arm.

    I didn't put that screw back in when I installed my new one and I've had no issues. You can see how it mounts here:

    [​IMG]
     
    This site contains affiliate links for which the site may be compensated.
    #7
  8. Jul 19, 2021 at 11:05 AM
    #8
    tcrain4x4

    tcrain4x4 [OP] Member

    Joined:
    Jul 17, 2021
    Member:
    #371494
    Messages:
    13
    Gender:
    Male
    First Name:
    terry
    Arkansas
    Vehicle:
    2001 tacoma 4x4 trd
    fabtech lift
    Ok thank you for your response
     

Products Discussed in

To Top