Seat Jackers, Spacers, Risers, Jackers

Didn't know how to change everything in my old ad so here this is.

If you are aware of the seat mod, I did it and what a difference. There is more than 80 pages of feedback please read some of it. Materials used is 6063 solid aluminum bar stock. All prices includes shipping. One seat $36 with bolts ( Grade 8 ), or Both seats $64,This includes hardware and shipping.


I can make special order sizes if not in a big hurry. Couple days. Message with any questions ,or email me. Please use kujans0@gmail.com Please know you do this at your own risk, I am making these for you at your request.
Thank you

Taking Paypal account, kujans0@gmail.com

Or mail check to
Dennis Towns
1534 Marble Lake Dr.
Jacksonville Fl. 32221

 

Do these fit the first gen tacomas?

 

I don't believe so, their rear mounts are on an angle I think.

 

How tall are the spacer? Are the bolts M10-1.25x60mm? How much for the spacers without the bolts? Thanks.

 

Spacers are 1" tall, the bolts are M10-1.25x50mm Grade 10.9 I will take $21.50 for just the spacers. Shipping cost me around $5 so not making much. Thank you

 

I assume they fit the 3rd Gen Tacoma?

 

Yes sir.

 

Where is the thread with all the Info on these I'm interested but 6'4 in an already tiny cab dont know if these would be making my head smack the top

 

Apologies if I posted this in the other thread but $$ sent for one pair via PayPal. Thanks for the bargain!

 

Make sure you included address. Thank you and please be safe

 

Paypal sent for two seats.
3925 Servia Elmira Rd
Duck, WV 25063

 

Gotcha covered. Thank you

 

Super fast shipping. Thanks @olecoot

 

Thank you my friend, keeping these old hands busy.

 

Sorry to ask the obvious, but how do these fit the front when the bolt is at an angle and raising the seat frame will create an offset of the bolt and mounting threads?

Any pics of these installed?

 

These go under the rear mounts not the front. It pitches and raises the seat 16 degrees and it changes the whole dynamics. Just pull your rear 2 bolts and slide something about an inch under the mounts and sit back in your seat. Better feel , better view.

 

Still have these available?

 

I thought the whole point of things like this was to raise the front, and support your legs. Hence why seat jackers go in the front. Isn't that just going to make it worse, like you are sliding off the seat.

". There is more than 80 pages of feedback please read some of it." Link to this?

 

It does raise the seat, try it with something besides the risers I sell. Just pull the 2 bolts and put a socket or something about an inch tall under the rear 2 feet. You will be amazed.

 

I wonder if these will lift the passenger seat enough to slide a Kicker hideaway 10" under it.