What Have You Done To Your 3rd Gen Today?

Did you paint the originals, order new from dealer? Asking for a friend.

 

Traded in the white SR 2x4 for the silver TRD OR 4x4. Couldn’t be more stoked. Let the mods begin.

 

(Big Daddy reference)

 

I bought my cover right after I bought my truck since my boys decided we were going to take it on a road trip we had planned two weeks later. I’m glad that we did because it made a big trip even more of an event to them. Between my UnderCover Flex and running the drain lines through the factory drain holes with the barbed fittings the bed was going to stay pretty dry and be secure.

I’m glad I got the mat before the trip too since it sits on the top of the grooves in the bed it keeps my gear nice and dry above the little bit of water that may end up in the grooves in the bed before it drains out. Between that and keeping things from sliding around I am very happy that I have both. That and I think the mat looks cool in the bed so that has to count for something too.

I will say that I needed the cover and wanted the mat and I am glad that I have both of them.

 

I have ditch lights. I use em once a year. I look at my grill every day and am happy I switched it out. My $.02. Yes, my truck is mostly a pavement princess

 

I also waited way to long to upgrade the grill and kick myself for not doing it sooner

 

Yup, 285/70-17s

 

Used it as a truck yesterday


So the DFW area Snowmageddon we had took out the 42 year old Ash tree in front of our house as it never came back. Then sucker branches started spouting all over it with the majority at the bottom on the street side. Code says the trees must be trimmed to no lower than 13' for the Fire Trucks to pass under them. Had to stand on toolbox in the truck to reach some higher limbs but it got trimmed. $1250 to remove the dead tree now or wait until Fall for a much better price. We can wait.....Code is OK for the moment.

 

THANKS!

 

Thanks - yeah those look pretty nice - positive feedback from pretty much everywhere. They made the list.

 

I bought the cover to keep the weather out when I carry my work equipment and to prevent theft. I always strapped everything down to prevent it from sliding around.

Sometimes stuff would slide to the back of the bed and with the bed cover it gets really annoying to half climb in to reach that stuff.

Since I put the mat in my equipment doesn’t slide anywhere. It was well worth the money.

 

Threw on some 2x3 caps to plug up the front cross member opening. $8.00 for a four pack on Amazon.

 

Ordered from Ebay.

https://www.ebay.com/itm/Rear-Bumpe...nsor-Hole-Pair-For-TACOMA-16-20-/265183498310

 

Ebay.

https://www.ebay.com/itm/Rear-Bumpe...nsor-Hole-Pair-For-TACOMA-16-20-/265183498310

 

If I could find a raw midbass in 6x9 by them that fit my price point, I would add them to the chart. However, I ended up buying the Audiofrogs.

 

There’s still one on eBay as of right now, they might have it locked out for USA though, it might be Canada only.

 

Replaced my 285/75/R16 BFG KO2s with 305/70/R16 BFG KM3s.

 

Do you have a better link to these?

 

Yessir, here ya go.

$8 2" X 3" RECTANGLE TUBING END CAP PLUG - QUANTITY OF 4

https://www.amazon.com/RECTANGLE-TU...ld=1&keywords=2X3+PLUGS&qid=1626876261&sr=8-1

I purchased the four pack because I was unsure how the fitment was going to be. I thought I might loose one down the road.
But these are very snug (like hit in with a dead-blow snug). I don't see them coming out anytime soon.

 

of course they dont have my color without holes. im going to message the seller. thanks

How is the color match? good quality so far?