Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

Yes, definitely a decoration.

 

I second this but at somepoint you have to realize the yota motor needs to get ditched for a better powerplant that has more aftermarket support and can make more power easier and cheaper.

 

3.125” hole saw to drill out the coil buckets? I guess the template mounts to the top?

 

3” saw. And yes it mounts to the top. The pilot bit in my saw wasn’t long enough so I swapped in a full length drill bit to get it done.

I started drilling the hole with the drill spinning right, like normal. Once the pilot hole was drilled, I switched it to spin left so the hole saw was spinning backwards against the bucket. Did that for 5-10 seconds to get it started, then back to spinning right. I’ve found this works well for hole saws in thinner material/new, sharp hole saws. Otherwise it’s too grabby.

 

Or turbo (s)

 

So I’m talking to my wife about this. She wants to know if you chose the right girl? Will she support your build in the future? Does she even really love you?

My wife’s words not mine. Good luck bro lol

 

Nice, thanks! What was the final verdict on swapping the brake lines? Do they go from the frame to the hard line on the caliper or replace the hard lines?

 

I went frame to caliper...no hard lines

 

Your wife is so understanding!

 

What he said.

 

One of a kind for sure

 

She's standing right behind you as you type that isn't she

 

I mean, we were across from each other at dinner. But she loves driving the truck and gets sad hopping back in the stock 4runner afterwards.

Making me go be a good husband and post stuff to share a video on here lol. But swipe to the last one if you care.

https://www.instagram.com/p/CRnJh6WNUZO/

Only one I have of her driving for a little Halloween fun last year. But I’ve watched her blast through whoops with the girls riding along a few times. Just never seem to get my phone out in time.

 

She's fuckin rad

 

You chose well.

 

Yeah not sure how I got her but I’m not complaining.

Back to the normally scheduled programming though. All 4.0L 1grfe need boost, and suspension to handle the bump in power, and then all supporting mods to make the truck last

 

Sounds more like a honey moon conversation to me.

 

if a relationship can survive a home remodel, car restoration/build... it'll survive anything. test the waters with a LT conversion and performance nonsense.

 

Lol my wife just says she doesn’t want to know how much I spend anymore. As long as I’m not dipping into money to keep the bills paid, I have some savings plans for the kids, she doesn’t really ask me.

 

I wish I had something to Daily other than my truck...