SOLD: gen1 3.4 supercharger w/ fresh rebuild + URD upgrades and DT Headers - 4K - Alta, Ca

!SOLD!

***PRICE DROP to 4000, SAY WHAAAAT!!!***

**Located in Alta, Ca, more than happy to drive and meet up at any of the following nearby larger towns; Colfax, Auburn, Grass Valley, Truckee, Placerville.

Hi Tacomaworld,

I am considering selling my supercharger. It is a gen 1, 3.4l supercharger with a fresh rebuild from the high speed lab which included several upgrades, most noticeable and functional being an oil port for easy supercharger oil changes. The rebuilt unit is still in the box and has not been ran, fresh as a fresh rebuild can be. As shown in pictures, I also stripped it down and gave it a nice coat of VHT high temp Wrinkle paint to give it a nice powder coated look.

I also have a laundry list of items I purchased to go with the supercharger, basically everything (besides meth) you can get to bolt on and get more performance from the unit, all purchased from URD, also brand new and in the boxes. Items include;
- dynamic tensioner kit
- hardware kit
- spare belt
- URD 2.2” pulley
- URD 7th injector kit
- URD idler pulley
- URD crankshaft pulley
- Doug Thorley Headers
- URD billet battery tie down (not supercharger related, just bling lol)
- innovate PSB-1 powersafe boost gauge

Please look at the receipts below for details and prices paid. No receipt for the supercharger itself as I paid cash from another Tacoma owner.

Absolutely everything needed to slap a supercharger and then some in your truck and have confidence that it is ready for a long lasting and reliable life with manufacturers recommended service intervals (made even easier with the oil port, no dismantling anything).

I’m asking 4,500, which is a lot less than what I paid for everything, and about 1000 or so less than what you can order it for at regular pricing, and about 3-500 less than with discounts (the last picture is a shopping cart with the same options, but doesn’t have taxes or shipping).

Not cheap, but you get what you pay for in the end, everything is fresh and new and ready to rock and roll with an afternoon of wrenching (ok, the headers might take a bit longer lol).



Ps. Happy to go take pictures of the other boxes containing the URD stuff and Innovate Gauge, but in the end it’ll just be another picture of a box.

 

if youre willing to part out, im interested in all 3 pulleys, and the battery tie down.

 

dam i want this but my pockets are not that deep right now. Good luck!

 

Interested in DT headers if parting

 

ForumMember discount code for 5% off on URD

 

Let’s see if I get any interested parties in the next couple of days for the whole thing, if not I’ll start parting out

Also, 5% off of 5340 (URD price) comes to 5073, and taxes/shipping is still not included. I know it’s a not a cheap ticket price, but I did make sure my asking price was the best deal. available. Not out here trying to get one over on anyone, as karma has a way of balancing that out and I like my life drama free.

 

Wasn’t my intent to try and drop your price. I just saw your first invoice without the discount and thought I’d share for next time or if anybody wants a little off the top.

 

Oh, no worries man, I didn’t think you were, was just doing the math for everyone to help with any decisions they may be pondering. I’m all for savings, codes away

 

Wish I could fit the bill for this right now. GLWS!

 

PM inbound. Let’s see if we can find a suitable meeting spot.

 

Curious…how does that do going up the grade between Colfax and Gold Run? Or Alta and Nyack?

 

I would imagine it’d be great, never installed it though so I can’t give you a first hand review. I do have another boosted vehicle and it makes easy work of grades, for what that’s worth lol.

 

PMs responded to. Awaiting decisions, will keep the thread updated as to whether or not the items are still available after the potential buyers get back to me.

 

Can vouch for OP. Stand up dude


Also.... Wish i had 5k. Lol

 

Haha, thanks @Fernando , and good news, the taco may be finished up and ready for some light duty soon! Found a fabricator a couple miles from me who is gonna wrap up all the remaining tasks that need welding. Not going to lock or regear it as I’m probably going to SAS it next year, and now I’m kicking myself for going through all the trouble with the non locked rear and brakes, but oh well.

anyways, wrong place to throw all that out but I’m excited to get out there with y’all. Say hi to the family for me man

 

Hell yea bro. Fuck it, you will get your money back

 

We’ll see lol, I kind of want to keep them for a buggy project down the road, super light so it wouldn’t necessarily need tons, but who knows, I’ll probably sell them lol.

Anyways, updated post with price drop to 4700. Cheers

 

What kind of paint did you use to paint the SC?

 

Vht (very high temperature) wrinkle plus. Gives it a nice powder coat look and texture without the powder coat price lol. Also a high temp primer.

Edit: I’m pretty sure that’s what VHT stands for, but I’ve never actually checked lol

 

Also, dropped price again to 4500. Probably gonna stay at this price until the package goes to a new home or goes under my hood.