"Maint Reqd" not Resetting.

Had this Taco for 75,000+ miles and it's reset before.

Reset button currently works on changing the readout or resetting the trip odometer. Currently I reset "Trip A" every fill-up to track MPG.

I've seen 2 basic methods. Both start with the vehicle off.

1 push button and hold.
2 turn key to ACC
3 watch countdown

The variances are if the readout should be in "Trip A" or "Odometer" or if the key should be turned to "On" but don't start it.

Thats 4 different options, I tried them all. Several times. I even set the odometer to "Trip B".

I'm not getting the countdown. When I push the button the milage numbers come up, I turn the key (to ACC or ON) and after a couple of seconds the screen goes blank and then nothing happens. I've held the button for 10 to about 20 seconds.

Once I tried with the key in ACC and readout at Odometer, did it again with the readout at "Trip A" and that reset the trip to zero.

I don't need to reset it, it's just annoying that the light is on.

I'm not to the point of putting tape over it or trying to disconnect the light.

 

are you pressing or pressing and holding the trip A button while turning the key to the on position?

 

Thanks, edited the OP.

 

Key off scroll to trip a and hold in while turning key on

 

That worked.

I don't remember having to scroll before.

It also reset "Trip A" but it's always something

Thanks