Let's Talk Lift/Level...Any 2" front - 1" rear Levels?

Got the lift installed yesterday,1 1/2” front and rear,and new Wildpeaks on this morning.265/75r16

 

Not sure if you're replying to my post or not, but if so yeah, cab mount chopped, firewall/pinchweld hammered in, some more inner fender well hammered up around the intake/battery box

 

Looks good! What kind of rims are those?

 

3.5" backspacing or 4.5" on the SCS F5's?

 

I noticed you take some great photos of your truck. I'm considering the SCS F5's in that color and 4.5" BS. Would you mind sharing some more photos of your truck at different angles?

 

Much appreciated! Sure will, and to stay on topic (lol) I did order this very setup and am waiting for the lift to arrive. Loooong wait, backordered till late August. In the meanwhile I picked up a set of 5 General Grabber ATX 285 70 17's. What a step up from my current tires.

 

What 2/1 kit did you go with? Your rocking 285/70/17?? any rubbing? Love the setup!

 

Stock:

Stock Height With 17x8 0 Offset Method Wheels(No Rub)

After pics with 2/1 Inch lift With 1.25 Spidertrax
Wheel Spacers(Rubs when reversing)

 

Looks great! What size tires?

 

They are 265/70r17

 

Hello.
I have a ‘15 DCSB TRD O/R. I also have a set of 2021 3/1 OEM leafs with only 1700 miles on them which I haven’t installed yet.

I’m looking to do the same set up you have and to add Sumo Springs to it for whenever I carry heavy loads which is rare.

How’s your set up holding up so far?

What brand 1” block did you go with? Is the block tapered?

Finally, how does it ride?

Thank you

 

What are your guys' center hub to fender measurements at?

 

The rear settled to 1 1/4" higher than the front. When I first put the blocks in it was at 1 1/2" rake. The blocks are 1" steel non tapered. I forgot the brand. Ride is great.

 

TRD Lift Kit on mine - 2” front / 1” rear.

 

Sounds good. Thank you

 

Used the 2" front RC shocks and springs with 1.5" in the rear, ended up being 1.5" lift front and rear.

 

2/1 on 16x8 with 265/75/16

 

With the 1" block in the rear, do you use the OEM u bolt? My friends came supplied with the u bolts that are too long in my opinion and is sticking out in the bottom about 2"-3" I think. And I am thinking that the company she bought it from just uses the same u bolt for their 1", 2", or 3" lifts that's why on the 1" blocks it looks way too long. I was wondering if I can put back the OEM u bolts with the 1" block.

 

cut em down

 

Eibach lift. Around 2” up front and 1” block in back