2-Piece TRD Skid Plate?

So, I bought a TRD skid plate from a guy locally. He said it was OEM, it even had an OEM sticker. The material is correct, the weight is correct, but it is in 2 pieces. I cannot find this "version" anywhere. Did I get taken? It seperates just past the lift point. 4-bolts on the front portion and 2 bolts on the rear portion.

 

Can you post a pic? You're referring to the TRD Pro skid? I've only seen them being 1 piece, and not sure what sticker you are referring to.

 

Yeah, I will take a picture in a bit. I am "working" right now. The sticker is the SKU sticker.

 

TRD pro skid is one piece. The one you have is probably the TRD off-road skid, which is two plates.

 

So, this is where it is seperated...Well a LITTLE higher.

 

So you have a TRD Pro skid plate broken in two pieces?

 

I don't think I've seen one like that before

 

It's not broken, its just 2-pieces.

 

So someone cut it in half? Maybe they cut to work with another set of skid plates? The Pro plate should be one piece.

What you using it for? Looks or actual protection? If just looks leave the back part off?

 

please post an actual picture. Because as far as "we're" all aware, the Tacoma TRD Pro skid never came in a 2-piece version. Do the pieces bolt together somehow? Sounds like the person you bought it from had a drop bracket lift and modified it.

 

TRD Pro skid for 3rd Gen tacoma is definitely one piece

 

I will take a picture after work.

 

I bought the OEM one not too long ago , PTR60-35160, and it was all one piece

 

You have a Trd Off-road skid plate. It is 2 pieces!

A sport only had the front part!


I bought a 2016 Trd Off-Road skid plate set on Facebook marketplace and it came with both!


My buddy at work painted them!


I assume this is whatcha got!

 

Nope...see the picture above

 

Ha!

Not sure what ya got then. Sounds like someone cut it in half.

 

Biggie size it, with fries.

 

Sounds like it might be half 4runner skid, half something else.

Post pictures and the part number thats on it.

 

Best I can do...it raining out.

 

That doesn’t look normal for an OEM piece. How is the front part of the rear half of the skid supported? Is there a lip there that tucks under the forward piece?