What Have You Done To Your 2nd Gen Tacoma Today?

You will. Those stock speakers are garbage. I couldn't believe how light they were when I took them out. I also replaced my tweeters that I forgot to mention. I used these.

Tweeter Compatible with 2016 2017 2018 2019 2020 Toyota Tacoma 2012 to 2020 Subaru Forester Impreza WRX Crosstrek H631SFJ101 H631SFJ100

https://www.amazon.com/dp/B091YXXNQX?ref=ppx_pop_mob_ap_share
I just cut my old connectors off and put them on the new tweeters and they fit right in.

 

Finally got my map and dome lights in the mail last night. It's been about a month since I ordered them. First they sent me a set for a 3rd gen then it took them awhile to get the right ones out to me. I figured they didn't have them in stock since Meso doesn't even have them. But https://www.runnin4tacos.com/ had them in stock in July. And I got the dual brightness dome light. These things are bright, I might say a little too bright.

 

I'm far from a painter myself ; this was my first time taking on a project that involved re-painting any part of a vehicle. Per the instructions on the automotivetouchup, I started off with a 1000 grit sand (if you have rock chips or more major imperfections you may need to start more aggressive), and then did a wash with dawn dish soap to remove any residue or oils and let dry. And then just took my time with the different paint coats. My biggest issue was keeping crap that was floating around in the air from landing on my paint between coats.

 

Those look like nice and I like the color combo. Did you go with leather and is that the light gray? How's the fit? I'm worried that slipover covers will be baggy in places and move around when you set on them.

 

I saw someone else on here with this color combo and really liked it, so I screenshot the picture and sent it to Tyler @ Clazzio and he did a copy of the set for my second gen. They are baggy on the backrest, seem to be a little to tight so it leaves an air pocket directly behind your back. I’m hoping they stretch and settle more but overall the fit is really good. Definitely looks factory and install was easier than I expected, although still a PITA….

got my prinsu installed today

 

damn, I use the cleaner and sealer on my wife’s 4R wheels every wash. Talk about over kill lol

 

I don't judge.

 

hit a deer on the way home from work this morning. her head hit the ARB bumper then spun her around and smacked my rear door & rocker panel. It pushed the door skin in but I think I can get most of it back out. can't have nice shit...

 

Dislike! But at least you have that bumper and didn't wreck your front end and radiator

 

@Northbound_Taco yup, a deer is the reason I have an ARB. Needless to say I cannot wait for rifle season this year lol

 

I had the black leather ones in my 3rd gen for over 5 years and they were tight as a glove and never slipped. I just installed the light gray PVC in my 2012. Looks just as good as my 3rd gen leather. My only issue is the fold flat passenger seat cover is a pain to get the rear stretched correctly for tucking into the "table" area. Wish I would have bought the non fold flat version for that reason because I have no use for the fold flat seat table surface. In my opinion these are the best covers made and one of the best mods to install on any truck.
new 2nd gen:


old 3rd gen:

 

Do they put a pocket on the back of the seats? I like to keep my maintenance records there so they're not taking up the glove box. I can't believe Toyota didn't put one on.

 

My 3rd gen had one on both Clazzio covers. As the 2nd gen has the "table top" on the passenger seat back the driver seat does have the pocket. I went with the PVC material on the 2nd gen because it is more of a budget build and that saved me over $200. The leather covers are all PVC except for the perforated insert under the butt and against your back. My leather covers never had issues with the PVC area where you put most wear getting in and out. I felt if that material held up so well then it would be fine to go with the perforated PVC on the insert areas. They look the same when installed.

 

Changed my oil last night and emptied my oil catch can. I can tell you it is worth it! I cant tell you how many miles I've driven since I put it in but can't be much more then 1000 miles. I installed it on July 20th. So in 2 weeks this is how much oil it has collected. Its not much but for only 2 weeks that to me seems like a lot.

 

Don’t judge the zip ties. Just a MOC up of how I want them mounted lol

 

Did that to my flares a year ago, it came out great.

 

Got bored so decided to use up some of my stickers.

 

120k spark plug change

 

Folsom Lake?

 

What’s left of it. Lol