What Have You Done To Your 3rd Gen Today?

I just had my new König Countersteer's installed!

 

Lookin' sharp!

 

Not an option on the SR, it's updated via the app.

 

All good, I found GAR-FAB and as a legit made in Canada and shipped to my door at 215$ CA... I scooped one! So it all kinda worked out for the best for me. ...which rarely happens!

 

Sick looking rig

 

TPMS is mandated by law for all vehicles manufactured after 2007. It's there, somewhere.
Zim

 

OH SHIT... Now I get it. OH YEAH! I LIKE IT!!! Yeah - now I like the project. At first I was wondering what the hell was going to go in there - and I kept wondering what they were doing. But now - yeah it totally makes sense.

 

That's what I have on my 20 taco its silver

 

Makes sense - prototype work is usually more expensive than the finished production model. You run into all kinds of odd shit when you are making prototypes. Believe me... I do it all the time. But yeah - I kind of expected the initial cost for this custom mode would be 3-5x typical mass production costs.

 

Bumper cut and install during April.
Had trouble deciding the color setup with a more aesthetic light bar in June. But the light bar was removed after condensation buildup.
Oil catch can install and current stance on a 2" front and 1" rear lift on Bilstein 5100's

 

I really want to install that style of bumper, but I just can not bring myself to cut into the bumper of a 1 year old truck.
Your truck looks great!

 

I have a 2019 access cab, which requires drilling holes into the roof for the prinsu rack. It sat in my garage for 4 months until I was finally 70% ok/willing to drill the holes.

The bumper wasn't so bad. I travel into Philly for work on a daily, so the added protection was an easy call.

 

Well tpms yes, but not individual tire pressure readout

 

King roost guard on the rr shock. Had to remove some material at the back where it bolts together to get in in place. You can get it to open up enough to put on without unbolting the shock.

 

Installed LASFIT LEDs in my low beams and driving lights tonight. Here’s a picture with both installed on the drivers side and the old bulbs on the passenger side. I agree with CreekCrawler that the brightness and color are impressive.



I also installed LASFIT LEDs in the map lights and the dome light. The brightness and color are impressive inside too.



I’m very happy with the difference inside and out.

 

That's actually quite impressive inside.

 

Here's some links and part numbers I put together. You have to buy the 3 pieces separate but they fit together perfectly.


Anytime 400w mod

Auto transmission is at the top, and manual transmission is a few paragraphs down

https://www.tacomaworld.com/threads/how-to-400w-anytime-mod-3rd-gen.436831/


Post #8 on this thread shows the white and blue wires you'll tap into in order to get the 120v inside the cab. They're on the plug going into the inverter, which is under the center console. I believe blue goes to the big slot of the outlet and white goes to the smaller slot, I really don't remember. I used a T30 torx bit to remove the bed outlet and copied the way it was wired up. For the ground I just ran a wire from the ground prong of the outlet to a grounded piece of metal in the truck.

https://www.tacomaworld.com/threads/mr_ashs-3rd-gen-road-tripping-build.443263/


Toyota part numbers


USB ports

0016-00225


120v outlet

(It's labeled by Toyota as a "12v outlet" for some reason but it's the 120v household style outlet

85530-35050-C0


Bezel/plate

85536-35020


I don't have a part number for the harness to plug into the 120v outlet, I just made my own by modifying some small terminals. For the USB ports I just spliced into the 12v power for the ports inside the console.


As for cutting the hole, I used post #7 on here as an example. It looks like he cut his with a dremel or saw and jb welded the bezel in. I used a really sharp razor knife and trimmed and filed until mine hole was just the right size for the bezel to snap in without glue. Any method should work fine was long as the hole isn't cut too big.

https://www.tacomaworld.com/threads/irrelevance.674761/


Another related thread

https://www.tacomaworld.com/threads...-cab-120vac-400w-anytime-power-outlet.622505/

 

Installed rock sliders and skids

 

I collect and refinish 3 piece wheels, mostly HRE, for fun. Went ahead and ordered made to spec adapters to run the faces on the left. They’ll be full hubcentric everything. Aiming to make them around 18x9.5 all around. Street truck not off roader.

 

what mount and lights did you use for the circular lights behind the grill?