Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

Yeah, I'm probably interested in fenders too if they will clear 37's.

 

Finally made it through this whole thread. Fuck. Count me in on the inner fender GB.

 

Just do yourself a favor and order it all now. I said I was done after the slide rack, TC pump and pivots. Now have LT front and rear on order. Fuck is right.

 

Got my mounts welded in and painted finally, now just gotta reassemble.

 

Lol. I’m too poor for LT. I’m just here to learn what to do after my steering rack dies and make my 35’s clear better. I was planning to tub the inner fenders but if I can save a lot of time and buy a pre-fab’d inner, I’m all about it.

 

The inner fender only helps with upper and forward clearance, not the firewall which is where most of the tubbing is for 35s or smaller, speaking from experience since I tubbed for 35s. If you really want to avoid tubbing then you would want the lower control arm pivots to push the tire forward and pair that with the inner fender.

Tubbing isn't that bad though. Took me two full days to knock it out. But that's not solving some of the other issues that these products solve.

 

I think my favorite thing about this thread is that we are all collectively watching/responding to this rather than doing our day jobs

 

Work from home on the secondary screen because Tacomaworld is more important. What else am I going to do all day, actually work?

 

I run stock ride height, 6112’s and SPCs. Both uppers and lowers are set to the forward most positions and I did a CMC. I already hammered the firewall and I don’t get anymore rub back there, just the front inner fender area. I’m on 35x10.5R17 skinnies which are a lot more forgiving in the rub department.

 

Work? That would be stupid

 

I bet that drone costs more than my truck.

 

It does, actually. Close to $200k a pop.

 

Ah, let’s keep the pattern going with Randy’s post in the background!

 

Or get a pic-ception going. Yours should have his post on your screen

 

#edited

 

maybe if you spent a little less on that drone you could afford some zip ties for those cables

 

that monitor mount goes so high, what kind of giraffe are you

 

Lets you use it in a standing configuration lol

 

LOL we move shit around so much, cable ties would just slow us down

 

Does the desk come up with it? Or do you just slide the monitors up? My desk at home is a standing desk but it moves the whole desktop up. I meant that it looks like your dual mount has more space above it for more monitors