Home Improvement Today?

Clean your house you heathens.































Or hire it done.

 

I can't imagine a situation where I would be worried about the 3 dust particles accumulated in a horizontally affixed slotted screw head.

 

Never used to bother me, the more house repairs ive done the more it bothers me

 

Switch plate screws should be clocked vertical like the switches , unless you install your switches sideways or on a 45 for some reason

 

next thing will be no light switches and everything on voice command...

 

I was thinking "The Clapper"

 

I have Google Assistant compatible bulbs in the living room and master bedroom so I can do just that.

 

Sometimes i do think itd be entertaining. Living room light or something.

Yuck. Let them listen to everything

 

I knew my 45* comment would raise a few eyebrows. It's purely something that has developed over time. Sometimes when working with metal plates, the screw will not line up vertically. Horizontal has never looked right to me. Doesn't help my journeyman was super OCD and wanted everything vertical when possible. So I settled on 45 when vertical wouldn't work. Horizontal just never looks right because the two slots need to align with one another. It's harder than it seems. One always looks off from the soft material they're made of.

 

Meh, if someone is getting their rocks off to my boring life, then at least I'm helping someone.

 

Here's my suggestion to those with the faceplate screw orientation debacle.
https://www.homedepot.com/p/Leviton...cora-Wall-Plate-White-R72-80301-00W/100199643

I installed them in the guest bathroom a long time ago, because I thought they looked neat. I never put any though into the orientation of the outlet cover screws beforehand.

 

Finally pics. Ordered led cap lights for each post. Gotta get another hanging basket for the other post. Ordered metal screw on letters to put my last name down the right post.



Edit. My neighbors yard driveway everything about there house is a dump. Don’t judge me

 

But are they orientated vertical under the cover

 

Already here

 

https://www.ecomfort.com/
I recommend fujitsu or mitsubishi (made in USA), make sure to get heat pumps. Go with the highest SEER rating you can afford.
The condensers come precharged, you pull vacuum and test then release the refrigerant.
Watch lots of YouTube

 

Oh, and lube.... use refrigerant lube

 

there's no debate , there are the people that clock the screws vertically and there is everybody else that does it wrong haha

 

Thoughts?