What Have You Done To Your 2nd Gen Tacoma Today?

I had a muffler back exhaust installed today. I used a Hush Thrush muffler with 2.5" in/outlets and had a new 2.5" tailpipe installed with and 4" expansion tip. It sounds a little more aggressive now but not enough to piss off the neighbors when I leave the house every 5:30am.

 

The girl and I had a wash date. I had a few trips to wash off so this one took a while. Also installed the k&n cabin filter and can feel the performance increase in the AC for sure lol

 

New shoes and alignment.

 

Garage mod

 

Instead of a train horn, I would highly recommend a refurbished Cadillac or Buick horn setup from the 1980's. Check out TW for the following:

https://www.tacomaworld.com/threads...ck-horn-put-in-4-cadillac-horns.508390/page-9

 

It's funny how 3 different identical trucks perform differently. I found out, unintentionally, that the 2008 AC Prerunner I bought this week, that is a little rough starting and never had spark plugs replaced in all 83k miles, is more powerful than my 2012, my previous 2016 and my previous 2008 with less miles. This one has plenty of tread on the Firestone AT tires yet I broke the tires loose a couple of times yesterday totally by surprise. I was pleasantly surprised. All had V6 with an automatic. Haven't checked the axle ratio yet but that may be different on this one than the others.

 

A side note from the snorkel installation.

Measure fifteen times, cut once, and when you do, drill one hole at a time because the truck, snorkel and template are all going to be different.

 

Installed the Scan Gauge II w/spiker engineering mount in preparation for the near future transmission drain refill and flush.

 

Looks top notch

 

Installed a console safe I got off the buy/sale/trade forum today.

 

Had my frame repaired about two weeks ago. From this, by the Cat:

to this:

Primed, painted and undercoated. Not too bad I think. It's my DD, not a show truck.

 

Washable with soap and water?

 

I will say that this was my 4th dobinsons snorkel install, and it definitely was the most interesting......it was fun though, and we did back up the claim that they fit on the 2.7 anyway......

 

No pics, but I installed the Redarc Liberty brake controller in my base model. I used the panel mount to put the knob in the center under the HVAC controls, and mounted the main unit in front of the gear shifter. I also relocated the 7-pin plug into the bumper. I had installed one of those cheap rear bumpers from Amazon after someone backed into me, and found that the 7-pin connector fit perfectly into one of the holes for the license lights. All I needed to do was drill new holes for the screws.

 

and we didn't have to cut the factory air intake piece.

 

Yearly oil change is done, just over 80k on it now, moved some crap around this weekend with it too.

 

First time off road since installing spridertrax 1.25” on Thursday.

Now my 255/85/16’s rub the shit out of my cab mounts. Shit.

Options:

1. Take wheel spacers back off even though it looks sick.

2. get smaller tires. (No way)

3. Get a welder and CMC.

seems like it’s a no brainer for option 3. Haha.