1.25” Wheel Spacer Rub?

Im adding some 1.25” wheel spacers to my taco which has about 2” of lift from some Bilstein 5100s and 265/75/16 Wildpeaks. I should be clear of any rubbing right?

 

OP you have stock off-road wheels? If so you will be fine.

 

you will be fine i had a 3in front and 2in rear lift kit and never rubbed on 285/75/16

 

The 265 will rub without spacers. You’ll Be fine with them

 

Yes, like the stock OR Rims look. Currently have 265/75/16 but feel they need a bit of offset to even up with wheel well & look better. Would like to go one more tire size up, but the heavy weight of bigger tires kills this engine. Hopefully the spacers give a better look.

 

Spacers make rubbing issues on the firewall.

 

I have 265/70/17 tires on 4Runner TRDOR wheels which have -10mm more of negative offset than the Tacoma TRDOR wheels (I also think they're wider) and run 1.25" spacers with about a 1.5 to 2 inch lift and have no rubbing at all.

I think you'll be fine and not have any rubbing problems and it'll look much nicer.